Hi Fellows!
I’m new in this stuff and realy want to get in to it. I'm buying stuff about 3 months for my MQ9 UAV and the parts almost done. Here is my part list and prices;

PROJET MQ-9 Reaper 98" 4-CH Brushless Remote Control RC UAV Predator $170.00
http://www.nitroplanes.com/mq9.html

ArduPilot Mega - Arduino Mega compatible UAV Controller $59.95
http://www.sparkfun.com/commerce/product_info.php?products_id=9710
+
OilPan
http://store.diydrones.com/product_p/br-0012-01.htm $159.95

Air Speed Sensor $19.95
http://store.diydrones.com/product_p/br-0004-02.htm

DIY Drones HMC $44.90
http://store.fahpah.com/ProductDetails.asp?ProductCode=diymagneto01

2 x XBee Pro 900 XSC RPSMA (up to 15 mile range!!) $143.9
http://www.sparkfun.com/commerce/product_info.php?products_id=9087
+
2 x XtreamBee Board (No XBee included) $49,9
http://store.diydrones.com/product_p/br-0015-01.htm


MediaTek MT3329 GPS 10Hz + Adapter $39.95
http://store.diydrones.com/MediaTek_MT3329_GPS_10Hz_Adapter_p/mt3329-02.htm

FTDI Basic Breakout - 3.3V $14.95
http://www.sparkfun.com/commerce/product_info.php?products_id=8772

Video Capture Device $10
http://www.dealextreme.com/details.dx/sku.11267

900Mhz 500mW audio/video transmitter & reciver & antenna $100
http://www.rangevideo.com/index.php?main_page=product_info&products_id=5
http://www.rangevideo.com/index.php?main_page=product_info&cPath=35_22&products_id=12

500-1600kv Brushless Motor $23.70 (i hope it can fly my plane xD)
http://www.hobbypartz.com/ra500brmow10.html

60A OPTO Brushless Speed Controller ESC (w/o BEC) [Volcano Series] $29.70
http://www.hobbypartz.com/volcano-series-60a-brushless-esc1.html

3 x Blue LiPo 3-Cell 2200mAh 3S1P 11.1v 25C LiPoly Battery $50.85
http://www.hobbypartz.com/83p-2200mah-3s1p-111-25c.html

Li-Po GUARD 25x33cm Safety Battery Charging/Storing Bag $5.75
http://www.hobbypartz.com/lipoguard.html

Exceed RC 6-Ch 2.4Ghz Transmitter Receiver (Full Version) $44.95
http://www.hobbypartz.com/exrc62tr.html


waiting for servo cables, propellers

Total Amount About; $1000 + shipping(im not sure but i think its about $450)

yeah that seems oke but i moved a new city and lost my tools... I dont have even a screwdriver. Need to buy some new tools to assemble it.
I will blog my experience, photos and videos here. I hope i wont ruin it xD


When i complete the project, i will start coding a GCS and other stuff (i have good ideas)

Nvm I’m looking for a new tool set atm. I will keep inform you guys. If you have any idea our suggestion please share it.

Take care


Ersin.

Views: 8386

Comment by Zachariah L Hanson on April 7, 2011 at 5:53am
Well you have inspired me and for my 30th birthday present I bought a V2..I have been doing a lot of research on this model and can tell you that the motor you have listed is grossly underpowered for your setup...general rule of thumb is 100w per pound....if you don't keep your airspeed up she will stall and have seen many youtube videos of this..I plan on doing about 90% of what you are so I ask that we keep in touch so we can collaborate data...mind you I am months to next summer before I get my build completed and off the ground..I have found numerous build threads on this one guy has a 13 part video build on youtube I have seen some good ideas I will try to compile a list and send to you this weekend...hope to talk to you more soon...
Comment by Ersin Acar on April 7, 2011 at 6:57am
i bought a new motor. if you check my build logs you can see. i will share video review in future but i'm dealing with moving now.

Comment

You need to be a member of DIY Drones to add comments!

Join DIY Drones

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service