Introducing the AUAV X2.1 Flight Controller

The AUAV X2.1 is all about lessons learned. The X2 was a very successful board but there was still room for improvement. Following the PixRacer project we had time to invest into making the X2 the high quality PixHawk replacement we intended it to be. Major changes include: updated IMU sensors, power supply has been redesigned, headers have been laid out more logically, remote USB connector, industry standard 30.5mm mounting points.

Questions and comments are welcome!

Phil and Nick

Available: October 1, 2016

Price: $130

Site: http://www.auav.co/product-p/auavx21.htm

Processors:
Main: STM32F427VIT6 ARM microcontroller - Revision 3
IO: STM32F100C8T6 ARM microcontroller

Next Generation Sensors:

Invensense MPU9250 9DOF
Invensense ICM-20608 6DOF
MEAS MS5611 barometer

New Power OR-ing schematic with reverse voltage protection. 5V power module is required!


Connections:

2.54mm headers:
GPS (USART4)
i2c
RC input
PPM input
Spektrum input
RSSI input
sBus input
sBus output
Power input
Buzzer output
LED output
8 x Servo outputs
6 x Aux outputs
USART7 (Console)
USART8 (OSD)


JST GH connectors:
CAN
USART2 with flow control (Telem 1)
USART3 with flow control (Telem 2)
USB (150mm GH to Micro USB cable included for convenient mounting)
JTAG FMU Processor
JTAG IO Processor

Size: 36mm x 50mm

Mounting Points: 30.5mm x 30.5mm 3.2mm diameter

Weight: 10.9g

Views: 7083

Comment by Johnatan on February 13, 2017 at 3:53pm

They failed to deliver the product again!

No more trust in AUAV!

Comment by Phillip Kocmoud on February 13, 2017 at 4:26pm
Johnathan - Who are you and what are you talking about?
Comment by Johnatan on February 14, 2017 at 4:46am

I am a guy who waited for X2.1 but after you could not solve the issues, I dumped you for the Pixhawk 2.1.

Comment by Cala on March 30, 2017 at 7:00pm

Any new news about this board?

Comment by Andreas on June 5, 2017 at 12:39pm

@Kocmoud I was looking forward to order one of those... any Indication when you will be able to deliver?

Comment by Cala on June 5, 2017 at 3:24pm

I waited this for a long time and ask many times but I hope that fails because any response and no news for a long time, It's a pitty, looks cool design for little builds; I bought a MROBOTICS authorized pixracer at the end, nice support.


Developer
Comment by Jordi Muñoz on August 29, 2017 at 3:37pm

For those waiting since September 2016 (=P).  mRo has the X2.1 available now: https://store.mrobotics.io/mRo-X2-1-Rev-2-p/mro-x2.1rv2-mr.htm

Comment by kiki boy on August 30, 2017 at 6:06am

Hi Jordi,

Sorry but I'm confuse in version. I'm thinking that x2 was replaced by pixracer. So what is the difference and which version to choose ?


Developer
Comment by Jordi Muñoz on August 30, 2017 at 8:05am
@kiki boy

Pixracer and x2.1 and different platforms. Pixracer doesn't have the IO chip and therefore way less inputs and output pins.

Developer
Comment by Jordi Muñoz on August 30, 2017 at 8:11am
Are different platform *

Comment

You need to be a member of DIY Drones to add comments!

Join DIY Drones

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service