We are pleased to announce our latest development: SokilLink!

It is a complex both software and hardware solution for Mavlink-powered autopilots.
In short, our solution will allow you to build a modern drone with features available only in leading products. Main features are:

  • Using only one digital data link (e.g. WiFi)
  • Remote control from an USB gamepad or conventional RC using USB dongle
  • HD video streaming from drone
  • Displaying video stream on ground receiver with telemetry overlay and touch screen support
  • Various cameras control (Sony, Z Cam E1)
  • Possibility to connect a laptop with GCS

GCS app which runs on ground PC:

There is also configurator app available for those who want customize all these features:

Hardware consists of ground and on-board Linux-powered boards equipped with high-power WiFi cards.

On-board PC (on image) has HDMI input, USB where you may connect your camera or other devices and two UARTs.

Ground PC (on image) has HDMI output for video and telemetry overlay displaying, USB for game pad or trainer dongle and Ethernet.


We're still polishing SokilLink so at this stage we expect to establish connections with advanced users and drone makers interested in our product.

There are also planned many other cool features:

  • Backup link support: RFD900 (only for Mavlink) or 3G/LTE (also for video)
  • Multiple cameras or even UAVs connected to one station
  • Sony block cameras support (with precise zoom control and other features acessible through API)

The software runs not only on mentioned boards but also on other compatible ARM ones and of course Raspberry Pi.

If you think that WiFi would not satisfy your needs we're happy to tell that we are also working on integration with another digital link which gives up to 25km range!

Write us on contact@sokil.aero if you are interested :)

Views: 1816

Comment by Sokil.aero on July 15, 2018 at 3:14am

Hi, Bruno.
The price will be $1100 for boards set with WiFi.
The Intel CPU on the ground is really very cool so we think that aluminum case itself would be enough for effective cooling.

Comment by Greg Fletcher on July 15, 2018 at 11:42am

Looks like a nice unit. If it is reliable you will sell a lot of them. This may be a dumb question, but is the wifi link encrypted? Have you measured the latency of the video link?

Comment by Sokil.aero on July 16, 2018 at 1:19am

Thanks, Greg.
Sure, WiFi link uses WPA2.
Video latency highly depends on used camera. With GoPro it should be around 200ms, Raspberry Pi camera has much lower latency.

Comment

You need to be a member of DIY Drones to add comments!

Join DIY Drones

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service