SmartLink - 2x HD video, telemetry and control up to 20 km

Sky-Drones has launched a new product. It's called SMARTLINK, this is broadband digital datalink with integrated onboard computer. Two HD video channels, telemetry and control with ultra low latency and range up to 20 km. Fully supported by SmartAP GCS app on all platforms and compatible with PX4, Ardupilot, QGroundControl and Mission Planner. More information here.

AIR Module

SmartLink Air is based on powerful quad-core ARM Cortex A53 SoC (system-on-chip) computer running Linux. 

The system is capable of handling two real time HD video streams from cameras, autopilot telemetry and control. 

It also has plenty of resources for user applications. Various interfaces e.g. USB, UART, I2C, SPI allow to connect payload and tightly integrate it with flight controller and / or ground control station


Ground module is very compact and lightweight, it has micro USB connector to interact with any kind of device - laptops, smartphones, tablets, desktop computers supported. All you need to do is connect it and open SmartAP GCS App.

Ground module features active cooling system which allows the module to withstand high ambient temperatures making it reliable even in harsh environments.

2x2 MIMO technology provides higher bandwidth, lower latency and longer range.


SmartLink was specifically designed to be used with SmartAP GCS - powerful cross-platform ground control station. SmartAP GCS supports:

  • 2x HD video streams display
  • Full camera controls
  • Video recording on microSD card
  • Image capture on microSD card
  • Radio settings configuration
  • Drone control joystick
  • Payload control joystick

SmartAP GCS can be used on any platform and operating system including MacOS, Windows, iOS, Android and Linux.

Views: 1771

Comment by Kirill on August 26, 2019 at 2:46am

Rana, yes, both 1080p and 1080i are supported. 

Firefly Q6 FPV HD tested fine. 

Comment by Subatomic on August 26, 2019 at 11:47am

20km on 2.4, 2X HD feeds, AES, 75g, and all that without directional antennas? This is alien technology level.

Comment by Nikola Rabchevsky on August 26, 2019 at 1:26pm

What's the data rate of the UART?
Is there any chance of a point-to-multi-point version of this (one base station and multiple air stations)?

Comment by Kirill on August 26, 2019 at 2:00pm

Nikola, 57600, mainly for compatibility with autopilot telemetry ports. But can be configured to any value. 

Yes, this is supported. As well as one air station and multiple on the ground. 


You need to be a member of DIY Drones to add comments!

Join DIY Drones

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service