AUAV-X1 test results. Guys, are you ready to fly?

3689595086?profile=original

Hi guys,

Most of the AUAV-X1 tests passed just fine. The tests were so many, therefore I represent the most important ones.

For the moment the W25Q80 NAND Flash driver is not yet tested, that's why we use FM25V02 FRAM on board instead.

3689595217?profile=original

For the moment AUAV-X1 works with either ST IMU set ( L3GD20H + LSM303D ) or Invensense IMU ( MPU6000 ) + external magnetometer HMC5883L. Real flight tests ahead.

What I can say after all tests done:

1. AUAV-X1 is fully functional as expected with either ST IMU or Invensense IMU;

2. AUAV-X1 is compatible with PIXHAWK firmware and works just fine with QGC;

3. The microIMU board must be redesigned to have ST + Invensense combo onboard. Stacking ST IMU and MPU6000 IMU impossible;

4. A case has been designed and some vibration tests have to be performed;

5. Real flight tests ahead when the rain stops. The Balkans are floaded;

6. W25Q80 NAND Flash driver has to be tested.

We started fulfilling the preorders with ST IMU.

Many thanks to Lorenz for his support during all the tests.

Thank you Lorenz!

Best regards

Nick

E-mail me when people leave their comments –

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • Hi guys,

    Very very important ! The preliminary manual is ready in DOC and DOCX formats. Please advice what to add/remove/change. Your advices are highly appreciated. Some of you already had their X1. Please share your thoughts/comments.

    Nick

    AUAV-X1 user manual.doc
    Shared with Dropbox
  • Hi Nick,

    Good news, Very much looking forward new flexible board.

    Best regards

    Aaron

  • Hi Kirill,

    Email me at info@arsovtech.com . Sorry for my website is not updated yet, but no time left for. I'll update it soon.

  • 3701739748?profile=original

    Guys.. really struggling to understand how to make a pre-order :(

    P.S. Will the CAD files be available? I really like to incorporate the board into a design and some solidwors or othe CAD model would be really nice...

  • Developer

    Glad to see it coming to market, keep up the good work!

  • Great news, because i'm done fighting DF13 connectors.

  • it works fine for me too..

    i am waiting for the full  new chip design too because dal sensors is already use for arduplane and it should be here rapidly for arducopter

  • Moderator

    Aytek,   That site does not alert on my Defender, nor on a PC with Trend A/V, nor my laptop with Norton InternetSecurity2014.

    You might need to check your PC.

  • Hi Aytek,

    Checked...it works just fine. No idea why this happened.....btw, it is Windows d'fender...... :-)

  • Hi Nick,

    www.arsovtech.com blocked by Windows Deffender. (dsggsdfhsd.sirene.com.ar) I think you may want to check it.

    Cheers

    Aytek

    3701739372?profile=original

This reply was deleted.