Blogs

Free OS UAV Plan!

Posted by Ryan on November 13, 2010 at 6:30am
I designed this baby over the weekend for everyone to have if interested. It should be a very good size for most of your application. I can be built with foam, wood, and composite.


Name: RVOS v.1.0
Wing Span: 1.6m
Length: 1.1m (nose to tip of v-tail)
Max Weight: 6kg
Recommend 4 Channels (Aileron, V-tail, Throttle)
Power: .45 - .65 cu.in. or equilvalent electric power

DOWNLOAD ZIP FILE HERE!!!!





E-mail me when people leave their comments –
Follow

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • Alvarez January 25, 2018 at 4:36am

    Hello guys. i would like to build this uav, it look very good! the link seems to be broken... is there a way to download it on the site?

    best regards

    greg

  • doronby January 19, 2016 at 7:19am

    Ryan,

    Loved going over your SW design files. You did a great job, 

    I have a question: When you loft (for example ;the fuse), you seem to alway use 3dsketchs for the guide curves.

    Is there any reason for that or would a sketch on a plane work just as well ?

    I have not seen this approach before and am very curious.

    Thanks.

    Doron

    p.s.

    If you look at a cross section of the pod in the area where the tail boom enters the pod, there is a little bit of voids...:)

  • Jim Powell August 22, 2013 at 8:30pm

    Hi Richard, I think that I may have the fuselage mapped out and ready to run one 1 half. Will keep you posted as to the progress. I have work to get done before I get to play at the shop. So the going is slow. Again Thank you for your generosity idn sharing...jim

  • Jim Powell August 2, 2013 at 10:43am

    Hi Richard;

       I'll let you know if we get this converted. Thank you once again for your generosity in sharing a labor of love. Hopefully I will get to start working on this soon...jim

  • Richard Hirst August 1, 2013 at 5:20am

    Hi Jim

     

    Link to Router file if you can make use of them (56 MB) (give it 30 mins to upload them)

     

    https://dl.dropboxusercontent.com/u/12747054/Router%20Files.zip

     

    Richard

  • Jim Powell July 31, 2013 at 4:30pm

    Hi Richard. I can convert for sure. If you would share. That would make it very nice to just convert and go to the tool. Thank you very much....jim

  • Richard Hirst July 30, 2013 at 7:36pm

    Hi Jim.

    Not sure what software you use for the CNC.. I use Aspire from Vectric if you need the tool paths tool.

     

    Richard

  • Jim Powell July 30, 2013 at 6:33pm

    Hi Richard;

       Thanks for the link it opened just great in SW 2013. I will try and get a tool path for the the fuse and then attempt the tail boom and stabs. Thanks again for your quick response and for all of your work. The files show the talent and that you are truly gifted in this area. Me ! all I do in SW is banjo rings... Thanks again...jim

  • Drone Nerd July 30, 2013 at 6:55am

    Exactly, dowloading right now!


    Thanks again.

  • Richard Hirst July 30, 2013 at 6:51am

    try now.. don't think it had finished uploading..

     

     

This reply was deleted.