I want to show you my Pixhawk vibration dampener that im currently using. 

I used the 65g Dampeners from Hobbyking. The bottom plate is 1,5mm gfk and the dampened Controller plate is 0,8mm carbon that i had laying around.

The holes in the bottom plate are slightly offset to the side to keep some tension on the Controller.

So far it works really well.

if anyone´s interested i can upload the dxf files of the two plates.

and if anyone is curious about the home of this pixhawk here are two pictures. :)

Views: 2413

Comment by Mike Knott on April 23, 2015 at 5:39am

Very nice. Do you have the logs to show the vibrations?

Comment by Michael Visser on April 23, 2015 at 5:53am

Looking good, I'm migrating to Pixhawk from APM this week so looking at ready made solutions out there for Pixhawk

Comment by Suryana Putra on April 23, 2015 at 7:16am
Looking nice and working perfect if we put the FC on the top plate. I use 2 layers of 3M double side foam tape on my QAV500 and TBS Disco (both under top plate). Vibration level bettween -8 and -12 when hovering.
Comment by Alex on April 23, 2015 at 7:04pm

Really interested in the dxf file. Possible to share? Thanks

Comment by Alex on April 23, 2015 at 7:05pm

Also it would be great to see the logs.

Comment by SUNEEL KAPUR on April 23, 2015 at 10:11pm

Nice. Really interested in dxf file. Pl share, thanks.

Comment by Long Hoang Pham on April 24, 2015 at 12:17am

nice, please share your vibration testing and your dxf file please. many thanks

Comment by Andreas Habit on April 24, 2015 at 4:30am

today i updated to AC3.2 and did a short testflight in front of my house.

here are the Vibration logs:

and here are the dxf files and the SolidWorks model:

https://www.dropbox.com/sh/n643zituayagtwm/AABtB59-fmoPnMXaoVOed7rt...

Make sure to use a ziptie on each dampener, otherwise the controller will start to shake.

Comment

You need to be a member of DIY Drones to add comments!

Join DIY Drones

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service