Paul Marsh's Comments

Comment Wall (15 comments)

At 3:42pm on November 23, 2008,
Sami Finnila
Hi Paul,

For the source code go check the original thread. Hope that's it's of some use to you.

Sami Finnilä
At 7:21am on December 28, 2008, Curt Olson said…
Hi Paul,

I notice you live in Prior Lake, MN. I'm up in Circle Pines. All my gear is ripped apart right now after traveling to do a demo, but when I get it all back together and if we have a nice day at some point, I'd be happy to show you my setup in action.

At 8:29pm on February 15, 2011, blaine.d.oneill said…

Hi Paul,


I am located in Swarthmore, PA and interested in experimenting with some UAVs once the weather gets a little better. I saw that you created a York, PA google group and thought it might be worthwhile to meet up in the future... I have no previous experience with remote aviation but am eager to learn, pick up things pretty quickly.



At 8:09am on October 17, 2011, Johar Palacita said…

Hi Paul

I really interest on you TWENTY YEARS OF MICRO TURBOJET ENGINE post. I'm beginner on that topic, but i try to make it work by my self. of course i will apply on my UAV drones, all this time we use JetCat. Now it's time to make it self. Ohh, by the way can you help me find of "boeing Bird of Prey" design? I really interest on that plane.

At 3:15pm on November 24, 2011, kamran said…






At 8:33am on February 8, 2012, Ivan Buhatic said…

Dear Paul, just want to start with one such project, I watched your 3D drawings in SketchUp and I am very impressed. Can I get a copy of your RQ-2A Pioneer UAV aircraft 3d files

Thank you.

At 6:44pm on February 11, 2012, Andrew Rabbitt said…

Hi Paul,

I tried out your outline.wrl file, but I get an error message back that says:

 Failed to process file, may be empty file or contain unsupported geometry types, etc.

Any other ideas...?

At 8:47am on February 12, 2012, Paul Marsh said…

Hi Andrew,

No other ideas, I'm afraid.  SketchUp's export function might not be all that great.  I was able to export simple 2D line drawings to dxf for example, but an attempt at 3D did not work.


At 11:11am on September 9, 2013, zarnesoe said…

HI Mr.Paul,

I am Zarnesoe. I am very interesting about your RQ-2A Pioneer UAV project. Could I get somethings as like as 2d line drawings of this project? I would try to build your project. My email address is Thanks.


At 11:45am on September 9, 2013, Paul Marsh said…

Hi Zarnesoe,

Thanks for your interest in my project.  I sent an e-mail with some download links.


At 3:59am on October 22, 2013, Steven Sinagra said…

Hey Paul,

Pretty interested in your RQ-2A Pioneer UAV project! How long to your ready to get it in the air?? Like the 3d work too. Any chance of getting a copy of those plans as well, would like to go the same route, but maybe electric for shorter flight duration.


At 11:58am on November 10, 2013, ilden ak said…
Hi Paul,
I an really happy for your comment. Thanks for your interest. Could you send the dimensions and drawings to my e-mail?My e-mail is
Thank you very much
At 3:20pm on February 14, 2014, Jimmie D. Ivy said…

Hi Paul,

I am interested in your RQ 2A project. My focus has been to develop a foam model using Sketchup, but have yet to suitable 3 view drawings to really start my project. After a few hours of developing the wing, horizontal and fuse plan view components, I discovered that the plan view was smaller than the profile and frontal views. Do you have a 3 view of your project in which all views are the same scale? If you do, could I get a copy?

My email address is

Thanks. Jim

At 9:22am on February 17, 2015, Manuel Espín Benavides said…

Hi Mr. Paul

My name is Manuel, Im an Aerospace Engineering student and Im very interested in your project, as Ive been looking for something similar for quite a log time, is there any possibility of getting blueprints or the file to scale it up to 1/1?

Thanks a lot in advance.


At 7:30am on October 28, 2017, Eduardo Albornoz said…

Hello Paul, it's a pleasure.
I wanted to tell you that I have seen your UAV project and I have been building it for a while, although it is not exactly the same since I do not have precise information except for the one I was able to obtain from your website, would it be possible to obtain the files of your design? since I thank you for the information that is on your page which I have shared on social networks since I always try to encourage these activities, thank you very much Paul and greetings for you and yours.

You need to be a member of DIY Drones to add comments!

Join DIY Drones


Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service