Jordi Muñoz's Comments

Comment Wall (53 comments)

At 7:27am on August 7, 2009, Danilo Marques Figueiredo said…
Hi Jordi,

Thanks a lot for the help!!

Sorry for some inconvenience!

Best Regards.
At 5:34pm on August 12, 2009, Danilo Marques Figueiredo said…
Hi Jordi!!!

It's only to say that I received my order 1425, about 15 days, thank you!!!!
I have only one question I will do the assembly os my atto IR sensor, how I put the conectors, in the back of boards or the same side of sensor?!! Will it burn if I change the right side?!

Best Regards.
At 9:33am on August 13, 2009, Danilo Marques Figueiredo said…
thanks Jordi!!
At 8:19am on August 23, 2009, Connor said…
Hello
I have a few questions and was wondering if you could help me.

1: I'm thinking of buying the urdupilot but was wondering if it is possible to control it using the xbee transmitter / receiver from a laptop rather then an RC transmitter?

2: Is it possible to programme it so that at a certain altitude it could trigger a parachute to be released?

Thanks for the help
At 3:21pm on September 17, 2009, Mustafa Yasin HALICI said…
Hey Jordi. I am waiting news about balance sensor which You said to me last wek
At 11:14pm on September 21, 2009, automatik said…
"...i still have some problems with labview and the conversation between DCM to Euler angles is not working perfectly. I will solve it in the next days!..."

Jordi, if you want I can (probably) help with LabView stuff ( I do need 8.5 version of the code though)
At 7:07am on September 23, 2009,
Developer
Ryan Beall
said…
Jordi, any idea how soon I can get a ublox adaptor or two?
At 8:08am on October 4, 2009, Danilo Marques Figueiredo said…
Hi Jordi!

What I need to do the calibration of my FMA sensors?!
They aren't alligned with my Horizon...

Regards.
At 6:42pm on October 30, 2009, automatik said…
Jordi,
re newground station - LabVIEW files intended to be saved as 8.2 are still saved as 8.6 :(
Could you re-save them as either 8.x (any 8 version except 6)?
At 2:09am on November 5, 2009, automatik said…
Jordi,
I slightly modified labview code for ArduIMU - it basically displays cube inside main window (front panel) rather then opening new window. You can find it at
http://voidbot.net/images/ArduIMU-Razor-LabVIEW.zip
At 12:50am on November 8, 2009,
Developer
Ryan Beall
said…
Jordi, what board/manufactoring company do you use. Also what cad software do you use?
At 8:07pm on November 12, 2009, Eric said…
Hi Jordi,

I was hoping you'd be able to at least read my question and point me to somewhere on your site this may have already been answered?

I recently put together my ArduIMU, and I've set-up all of the software, but I'mat a loss as to how to tell the LabVIEW program to read the serial data. Is this step documented anywhere? Or would you mind giving me a quick couple steps to get the demo program running?

Thanks so much if you have the time to respond, I really appreciate it.

-Eric
At 8:17pm on November 12, 2009,
3D Robotics
Chris Anderson
said…
Eric,

Did you select the correct serial port that your FTDI cable is connected and click on the check box at the top? That should do it (it sometimes takes a minute to work)
At 10:45pm on November 12, 2009, Eric said…
Thanks Chris,

Actually I'm just an idiot and didn't have the right drivers installed. Had to reinstall LabVIEW a few weeks ago and somehow forgot to get NI-VISA on my most recent install. I reinstalled it and everything works fine now.

-Eric
At 10:23pm on November 13, 2009,
Developer
Jordi Muñoz
said…
Eric,

Sorry i sometimes miss the comments. Great to hear that you solved your problems.
At 12:10pm on December 28, 2009,
Admin
Thomas J Coyle III
said…
Hi Jordi,

Have you done any work on your Maja yet? I received mine last Tue. Will be a while before I can get to it.

Happy New Year,
TCIII
At 8:34am on December 31, 2009, Andy Geppert said…
2009 was quite productive on DIYDrones for you! I hope your schooling is going well too. Thanks for your effort, your willingness to help others learn, and your service via the DIYDrones Store. And... We're all anxiously awaiting the promised ArduPilot Mega roadmap update...
At 6:39pm on January 7, 2010, Kevin Hashawan said…
Why do you have to pay royalties to FMA for the infrared thermopiles? NASA was doing this stuff in the 60's.... I say if they are going to strong-arm the community, we boycott them and their invalid patents!
At 7:13pm on January 7, 2010,
Developer
Jordi Muñoz
said…
Kevin,

You are very welcome! ;-) But i no longer necessary since the new introduction of the ArduIMU, we are switching to regular IMU instead.

Best Regards.

You need to be a member of DIY Drones to add comments!

Join DIY Drones

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service