Does anyone have any experience with RTK systems? We're trying to perform surveying with 1 centimeter accuracy without having to set up multiple GCPs.
Some examples are the Swift Nav Piksi or t…DiscussionRTK Systems2 LikesArducopter MavLink To Hott Telemetry AdapterGood day guys !! I feel the need to obtain the information from my PixHawk in my Graupner MZ-24 screen. I found
some threads talking about a change in arducopter firmware to run the telemetry, not g…DiscussionArducopter MavLink To Hott Telemetry Adapter2 Likes
Dragonlink V3: LRS System as well as Telem
BlogDragonlink V3: LRS System as well as Telem10 LikesDragon Link V3 Advance system connect to Miss
Until now, the…
BlogDragon Link V3 Advance system connect to Miss7 LikesCompanion: TK1Here is a progressive guide to using my Nvidia Jetson TK1 as a companion computer with an Ardupilot/APM/Pixhawk flight board.
Things will be added as I get through my list of experiences, hopefull…DiscussionCompanion: TK14 LikesLow cost L1+L2 GNSS RTK receiver for Drones.
Dear friends, I would like to introduce you the RTKite GNSS RTK L1+L2 module receiver.…
BlogLow cost L1+L2 GNSS RTK receiver for Drones. 11 Likes
The SF11/C laser altimeter - awesome performa
With a range in excess of 100m and able to measure over water, the SF11/C is…
BlogThe SF11/C laser altimeter - awesome performa17 LikesSolution proposal for PixHawk IMU2-related B…Hello,
Here are key points in a few words:
The "BAD ACCELL HEALTH" error may be induced by two different causes:
IMU1 error - MPU6000 soldering issue while production in some early batches of PixHaw…DiscussionSolution proposal for PixHawk IMU2-related B…17 Likes
AlceOSD - Graphical OSD for APM/PX4
BlogAlceOSD - Graphical OSD for APM/PX418 LikesEffects of frame design on barometer perform…According to Randy the know issue of altitude loss after a high speed run is at its heart a frame issue.
This seems to me a very worthwhile discussion to have.
Once the majority of us understand th…DiscussionEffects of frame design on barometer perform…9 Likes
Safety First: 100A & 200A Hall Sensor with B…After I had a few problems with the standard power module from 3DR and the ones from Hobbyking, like falling off resistors (overheated) and burned out BEC from voltage spikes, I finally designed my o…DiscussionSafety First: 100A & 200A Hall Sensor with B…16 Likes
Wireless LANC remote control for BMPCCvideoWireless LANC remote control for BMPCC1 LikeCopter-3.3 released!
BlogCopter-3.3 released!31 Likes
Week-end DIY build project: 6S powered Pixhaw
Here a typical week-end "dronegeek" DIY build project : expermenting…
Pixhawk vs Pixhawk 2?Can someone tell me the differences between a Pixhawk and the Pixhawk 2 that 3DR is marketing as being supplied with the Solo?
I've tried searching, but only found vague references to Pixhawk 2.
Ev…DiscussionPixhawk vs Pixhawk 2?10 Likes
Copter reliability vs functionalityThis is a discussion related to the Copter development priority debate that popped on the Copter-3.3 beta testing thread. A quick categorization of the things we work on in each release include:
bu…DiscussionCopter reliability vs functionality18 Likes3+km HD FPV system using commodity hardwareHi
Over the last couple of months I have been working on a project that might be of interest to you: <a href="https://befinitiv.wordpress.com/wifibroadcast-analog-like-transmission-of-live-video-data/">https://befinitiv.wordpress.com/wifibroadcast-analog-like-transmission-of-live-video-data/</a>
Basi…Discussion3+km HD FPV system using commodity hardware37 Likes