I am glad you like our software so far.
Regarding circle tool, TBH I am not personally familiar with loiter tool in Mission Planner, only Loiter flight mode.
I did not clearly understand what is the functionality you would like to…"
We have concluded that the A3 flight controller (used in M600) sends very large amounts of telemetry data every second (slightly more than other our supported flight controllers) and therefore the telemetry data is slowing down UgCS and…"
Thanks for pointing out at the article, we had not mentioned that the article applies only to -non DJI cameras
If you have a DJI camera like Zenmuse X5, X7, Z3, etc. this does not apply and you can use trigger by time function.
Unfortunately we have not a tool for that because we honestly do not work with DJI software at the moment.
The only way I see for now would be if there was an enthusiast around who would create such tool.
After talking to our developers, it seems this is a known problem. We have raised the priority for fixing the issue, so I hope this will be solved in one of the upcoming versions.
For now, the only workaround is to split the Photogrammetry…"
Thanks for notifying, it seems that the uneccessary area is being covered because of the complex shape.
To investigate the case further, please e-mail us your mission or route file together with the screenshot to email@example.com
As of now, it is not possible to create single GeoTIFF images without stitching them. Reason for that is, that creating single images makes no sense, as the images need to be stiched to match elevation. Without stitching we can not know…"
"I can not promise you anything, only a rought estimate would be at least 3 months from now.
Regarding your second question about Mapper, could you please elaborate what is the exact function you would like to have? Is it simple image geotaggin…"
Thanks for your suggestion, our developers have thought about this possibiliy too, so I will be adding this as a feature request and hopefully for UgCS 2.15 it will be available.
I did not fully understood if you are having problems installing the UgCS for DJI 2.9.99 APP on your CrystalSky or the APP does not connect to Desktop installation.
If you are able to install the app but it does not connect to Desktop…"
I am sorry for the inconvienence. Are you completely sure that with previous (UgCS 2.12) it was better (both telemetry export and flight line drawing)? Would it be possible for you to send us some example telemetry export for…"
"Thanks for the clarification. Yes, all flight telemetry is automatically saved: Telemetry player in user manual
Just checked with our DJI developer and there is aspecific property of DJI SDK, which can cause the actual speed to be less that set in…"
"Hi Mr. Guey,
Just a few things to check:
When checking the horizontal speed, please allow the vehicle enough distance to speed up (some 30m to reach 5-6m/s, for example)
Are you sure that with previous version the speed was correct? If yes, please…"
Sorry for the inconvienience!
Please check that you are using UgCS 2.13 (desktop version) with UgCS for DJI app 2.9.99.
The desktop installer you can download from our web page and you can check UgCS for DJI app version within app, if it is not…"
Yes, we have a telemetry conversion tool to convert telemetry to CSV or KML formats: How to convert TLM to CSV or KML for UgCS v.2.11
We will be integrating the tool in our software for easier use, but for now please use the script.