"Yes, have sense. Thank you."
Colin Girvan's Discussions
Geotagging images with GeoSetter
Started Sep 10, 2017 0 Replies 0 Likes
I've been experimenting with GeoSetter to geotag imagery taken from an M600.Is anyone using this software? I've been able to sync photos with telemetry data in gpx format using the "Use track point…Continue
Colin Girvan's Page
Latest Activity
mark replied to Colin Girvan's discussion Altitude too high. in the group UgCS"OK - thank you.
I would suggest that you make people aware of this as it is a simple fix, but there can be an issue with the DJI Go App. For example, I don't often use the DJI Go App because I rely on the UgCS App. The first time I…"
Alexey Dobrovolskiy replied to Colin Girvan's discussion Altitude too high. in the group UgCS"Hi Mark,
I'm very sorry, but if our tech support engineer doesn't know solution based on information provided it has to ask additional information.
Flight limits are stored in autopilot, not in DJI GO. So if you never changed maximum range…"
Alexey Dobrovolskiy replied to Colin Girvan's discussion UgCs for DJI and A2 Flight Controller in the group UgCS"I'm sorry, no. For A2 we will support connection only through DJI DataLink."
Colin Girvan replied to Colin Girvan's discussion UgCs for DJI and A2 Flight Controller in the group UgCS"Is this connection likely to be added to UgCS for DJI in future updates?"
Alexey Dobrovolskiy replied to Colin Girvan's discussion Altitude too high. in the group UgCS"No, UgCS doesn't override max altitude/radius settings in DJI GO.
Parameters in vehicle profile and mission used to check route only."
Colin Girvan replied to Colin Girvan's discussion Altitude too high. in the group UgCS"OK thanks Alexey,
I thought that since we were using UgCS, that it's altitude values overrode the DJI Go settings."
Alexey Dobrovolskiy replied to Colin Girvan's discussion Altitude too high. in the group UgCS"Hi Colin,most likely you exceeding limit set in DJI GO/DJI GO4 app. Please check limit here.Here can be confusing situation. Suppose you have 50m limit set in DJI GO app. And all waypoints in the route will have 45m AGL for example. But if your…"
Alexey Dobrovolskiy replied to Colin Girvan's discussion UgCs for DJI and A2 Flight Controller in the group UgCS"Hi Colin,
this setup isn't supported by UgCS. A2 should be connected to laptop using DJI DataLink."
Colin Girvan added a discussion to the group UgCS
UgCs for DJI and A2 Flight Controller
We have a TurboAce Matrix with an A2 FC that we have just upgraded to lightbridge2. With the LB2 we need to connect via the UgCS for DJI app, is this compatible with the A2 flight controller?Thanks.ColinSee More
Colin Girvan replied to Colin Girvan's discussion Altitude too high. in the group UgCS"Thanks Anna, I seem to have 2 threads going, I originally started this thread with this problem then found another thread that was related so commented there as well. I'll try and keep to this one.
As far as the altitude settings go, in the…"
Colin Girvan replied to Michael Gray's discussion Error Altitude too high in the group UgCS"Thanks for your comments, I originally started a new thread with this problem then found this thread so commented here as well.
As far as the altitude settings go, in the vehicle profile we have 'Max AMSL' set to 3000m (actual elevation…"
Anna Moshkova replied to Colin Girvan's discussion Altitude too high. in the group UgCS"Dear Colin,
Let me start with apologies for not answering sooner.
Nonetheless the drone and settings in software may have several limits of AGL.
Let’s take a look together to them:
The first limit is in the Properties of the route in…"
Colin Girvan replied to Michael Gray's discussion Error Altitude too high in the group UgCS"Has a solution been found for this problem, as we're having the same difficulty.
I've noticed the issue with updating the Take off Altitude then having it revert back when we upload the mission. Our takeoff altitude discrepancy has only…"
Colin Girvan added a discussion to the group UgCSAltitude too high.
We had an issue yesterday that I'm hoping someone will be able to help me with.When trying to start a mission by activating Auto Mode we kept getting an "Altitude too high" error. It doesn't say what altitude it's referring to and everything we tried didn't help.About 2 months ago we had the same issue after switching to 2.11, drove home switched back to 2.10 and the next day it was OK. We've been flying 2.10 up till about a week ago when I decided to try 2.11 again.This time we had no problems…See More
Colin Girvan posted a discussionGeotagging images with GeoSetter
I've been experimenting with GeoSetter to geotag imagery taken from an M600.Is anyone using this software? I've been able to sync photos with telemetry data in gpx format using the "Use track point from map" option. The issue I'm having now that I hope someone will be able to help me with, is I have the telemetry file with thousands of records with a local time stamp and images with the same local time. I have the offset in seconds between the two but I'm unclear of the process to sync them.…See More
Profile Information
- Please tell us a bit about your UAV interest
- Photogrametry Surveys
- Hometown:
- Smithers BC Canada
Comment Wall
- No comments yet!
Top Discussions
Groups
-
UgCS
240 members
-
ArduPlane User Group
1456 members
-
ArduBoat User Group
246 members
-
Arducopter Y6 Owners
367 members
-
Terrain/Surface Mapping
498 members
© 2018 Created by Chris Anderson.
Powered by
