Jeremy Stromsoe
  • Male
  • San Diego, CA
  • United States
Share

Jeremy Stromsoe's Friends

  • Seppo
  • Michael Oborne

Jeremy Stromsoe's Groups

Jeremy Stromsoe's Discussions

Tracker Success

Started this discussion. Last reply by Hugues Apr 30, 2016. 3 Replies

All,Had some success with APM Mission Planner based antenna tracker by following a tutorial from DIY Drones.  Here's the results (time lapse video using a simulator) with links, lessons learned, and…Continue

APM Joystick Questions, Channels 9-12?

Started this discussion. Last reply by Mark Van Haze Jul 13, 2016. 2 Replies

Has anyone figure out a way in Mission Planner to control channels 9-12 with a Joystick? It appears as though one can only configure Channels 1-8. I'm running it with Copter v3.3 and trying to…Continue

APM and 3 Axis Brushless Gimbal Compatibility

Started this discussion. Last reply by Jeremy Stromsoe Feb 26, 2016. 5 Replies

All,Before I go out and buy a brushless gimbal that I'm stuck with and is incompatible I'm wondering if people out there have a working configuration already.I've got a Raspberry Pi camera which…Continue

SOLVED: Dragonlink Range Issues

Started this discussion. Last reply by Cala Jan 26, 2016. 5 Replies

Hey all.  Running a Dragonlink UHF radio system on my QAV540 quad, having some interesting range issues that I never thought I would using such a powerful system!  My radio is a Taranis…Continue

Tags: Link, Dragon

 

Jeremy Stromsoe's Page

Latest Activity

Jeremy Stromsoe commented on keeyen pang's blog post Dragon Link V3 Advance system connect to Mission Planner via Blue Tooth for Dummy.
"Just thought I would save some others future trouble.  DO NOT try and send serial mav data at above the 19200 that is suggested in this post.  The 57600 bluetooth serial is fine between the transmitter and the ground station, but in…"
Apr 19
Jeremy Stromsoe replied to Quentin Mayberry's discussion MinimOSD baud rate
"Does anyone know if the arducam OSD software has been updated lately ?  This post is 6 years old and I'm having trouble finding the source code anywhere... mainly for the same reasons here.  I need to set the baud rate for the OSD to…"
Apr 8
Jeremy Stromsoe added a discussion to the group ArduPlane User Group
Thumbnail

Interesting Throttle Spikes in Auto Mode, Plane V3.7.1

Background:  We've got a large scale powered glider  that has been flying pretty well, except for one thing that is baffling.  We've done Autotune, setup and checked each parameter carefully in the list and wondering if we potentially missed something critical with the throttle and pitch settings.  Airframe: ASW20Flight Controller: Pixhawk…See More
Nov 21, 2017

Profile Information

About Me:
Bullets:
-FCC Ham License General Class KM6JGX
-FAA Private Pilot
-MS Aerospace
-Flight Test Engineer
Please tell us a bit about your UAV interest
Frame: QAV500 Frame w/540mm arms
Props: 12x5.5 Carbon Props
Motors: Tiger Motor MN3110-17 (700kv), 4mm shaft
Autopilot: Raspberry Pi 2 w/ Navio+ hat
GPS: Ublox M8N + Garmin GA25 MCX GPS Antenna
Battery: Turnigy MultiStar 4S 14.8V 16Ah
Internet Cam: Raspberry Pi Cam
FPV Cam: 1/3 Inch SONY CCD Board Camera 700TVL
ESCs: Emax 4 in 1 30A w/SimonK Firmware
Telemetry: RFD900+ Long Range Radio Modem
FPV Tx/Rx: Boscam Thunderbolt 2000mW 5.8GHz
FPV Antenna: Boscam 5.8GHz Cloud Spirit Circular Polarized
RC Tx: FrSky Taranis 9XD
RC Rx: Dragon Link V2, UHF
Hometown:
San Diego

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service