"Hello, there is no mistake. All drones and ground station are in single WiFi network. Technically drones can communicate to each other, but they communicate with ground station only - to receive routes, commands and RTK corrections and to send…"
Kristaps Brass's Groups
-
ROS User Group
165 members
-
ArduPlane User Group
1472 members
-
UgCS
283 members
Kristaps Brass's Page
Latest Activity
"Hello,
In the article, it is written that "Wi-Fi modules were used for communicating between the drones and the ground station." whereas it is written in the comment that, "The drones are communicating to the base station, there is no…"
Profile Information
- About Me:
- Representative of UgCS - Universal ground Control Software, mission planning software for unmanned vehicles developed by SPH Engineering.
You can reach me at kristaps.brass@ugcs.com
- Please tell us a bit about your UAV interest
- We create easy-to-use mission planning software for most popular autopilot platforms such as Pixhawk/APM, DJI and others!
Make sure to visit us at www.ugcs.com to find out more and try our software.
- Hometown:
- Riga
Kristaps Brass's Videos
Kristaps Brass's Blog
Comparing Precision of Autopilots for Survey Missions - The Results
Posted on January 22, 2019 at 3:00am 7 Comments 1 Like
Hi,
We’ve reached the final chapter in our series of articles in which we compare the precision of different drone autopilots from various manufacturers.
All drones were flown on a typical area scan route created using UgCS flight planning software and compared in terms of how…
ContinueLightware SF11/C Laser Altimeter and [ultra] Bright Sun
Posted on January 7, 2019 at 8:15am 1 Comment 4 Likes
Hi,
In December we had a great chance to test the M600 Pro system with a terrain following module in sunny Peru!
In general, SF11/C works perfectly. There was one annoying issue: under extremely bright sun over some surfaces it can miss readings for a long time. Fortunately, a solution was found quickly: during the…
ContinueHow We Flew A Winter Drone Show
Posted on January 2, 2019 at 7:30am 11 Comments 10 Likes
First of all, Happy New Year to all you DIY Drones users!
Shortly before Christmas, we decided to bring a childhood dream alive and create Rudolph the Red-Nosed Reindeer using drones. We created and flew a 50 drone show and would like to share with you the footage as well as our experience. Without further ado, here's the video:…
How we spent 8 days on an ice cap in Greenland and found a lost WWII P-38 fighter
Posted on September 17, 2018 at 4:08am 9 Comments 7 Likes
Hi, friends,
In the middle of the summer we had a chance to participate in an expedition with the aim to locate a missing WWII P-38 aircraft from famous Lost Squadron. Full story was covered by lot of news and…
ContinueComment Wall
- No comments yet!
Top Discussions
Groups
-
Micro Drone
45 members
-
ArduPlane User Group
1472 members
-
3D Printing Drone Parts
282 members
-
Andropilot Users Group
470 members
-
3D Models
57 members
© 2019 Created by Chris Anderson.
Powered by
