Patrick Duffy
  • Male
  • Manor, TX
  • United States
Share

Patrick Duffy's Friends

  • Peter Lambrecht
  • Luke Martin
  • Adrian Ong
  • Ashley Webb
  • Duncan McDiarmid
  • Abdoulaye Faye
  • Dazza
  • Brad Focht
  • Nery Nogueira
  • Brian Buckmaster
  • Richard Dobbins
  • Patrick Poirier
  • Richard Postma
  • Asier Martínez
  • Keith G

Patrick Duffy's Groups

Patrick Duffy's Discussions

Arduplane RTL crash Skywalker X8 plane.

Started Dec 24, 2015 0 Replies

I had a crash flying a big wing (Skywalker x8), when I hit the RTL switch, the plane started to pitch/roll wildly and crashed. The plane was flying at 30 meters, and the RTL altitude was set to 100…Continue

Tags: crash, Arduplane

Arducopter 3.2.1 throttle failsafe always lands, no RTL or continue mission.

Started this discussion. Last reply by Patrick Duffy Sep 18, 2015. 2 Replies

Does anybody have this problem? Throttle failsafe always lands with Arducopter 3.2.1 no matter what the setting is, RTL or Continue Mission.  I have tested this several times by hovering and just…Continue

Illegal drone use could threaten hobby

Started Apr 22, 2015 0 Replies

I saw this on the DrudgeReport report today:…Continue

Crash with Arduplane 2.76, in FBWA mode

Started this discussion. Last reply by Patrick Duffy Jan 12, 2014. 6 Replies

Had a bad crash today flying in FBWA, with a plane that has logged 100+ flights without any issues. Only change was upgrade to 2.76. Was flying level at full throttle, and the plane just took a nose…Continue

 

Patrick Duffy's Page

Latest Activity

Patrick Duffy commented on Patrick Duffy's blog post Thermal Imaging for your Drone on a Budget
"@AI B, are you using the Raspberry PI? The method I use to control the camera is through the PI. Why connect the camera to the PX4?  I connect the PX4 to the Raspberry PI if I want the flight controller to trigger taking pictures.  The…"
Aug 28
Al B commented on Patrick Duffy's blog post Thermal Imaging for your Drone on a Budget
"@Patrick, In our case, we're constrained by cost, weight, and space so the small module works best for us; as shown here. And, the PX4 firmware already have a driver for it. Without those constraints, then we probably had used/mounted…"
Aug 28
Patrick Duffy commented on Patrick Duffy's blog post Thermal Imaging for your Drone on a Budget
"@AI B,  it will probably work.  You will need to write your own code to connect to the stream, but it shouldn't be too difficult.  Seems like the cost is more if you use this module, compared to the USB camera they sell online…"
Aug 28
Al B commented on Patrick Duffy's blog post Thermal Imaging for your Drone on a Budget
"@Patrick, Instead of the usb adapter cable, can one use this board? https://www.sparkfun.com/products/14670"
Aug 27
Atico F commented on Patrick Duffy's blog post How to control a GoPro Camera on APM/Pixhawk with a Raspberry PI using WiFi
"I want to say if you could post the modified script. The rest of the setup I will know how to do it. thanks"
Aug 7
Atico F commented on Patrick Duffy's blog post How to control a GoPro Camera on APM/Pixhawk with a Raspberry PI using WiFi
"Thanks Patrick, Sorry, but I do not know anything about python. Could you do a little tutorial about it? "
Aug 7
Patrick Duffy commented on Patrick Duffy's blog post How to control a GoPro Camera on APM/Pixhawk with a Raspberry PI using WiFi
"@Atico F,   Yes it is possible to modify the script to switch between photo and video mode. You will need to use an extra channel on your transmitter and a second PWM input on the PI.  The PI zero should also work if you use the…"
Aug 7
Atico F commented on Patrick Duffy's blog post How to control a GoPro Camera on APM/Pixhawk with a Raspberry PI using WiFi
"I would like to get with a Raspberry pi Zero wifi and a Gopro4 silver"
Aug 6
Atico F commented on Patrick Duffy's blog post How to control a GoPro Camera on APM/Pixhawk with a Raspberry PI using WiFi
"Hello Patrick,  I would like to toggle between photo and video modes using an extra channel to control the camera modes It is posible?"
Aug 6
Jeff Ward commented on Patrick Duffy's blog post How to setup a Mission Planner HD-Video HUD using GStreamer and Mission Planner plugins
"Here are two simplified ways to solve the missing QtGStreamer parseLaunch() function: Copy the launch() function from parse.cpp, paste it in elementfactory.cpp, and rename it to parseLaunch(). Change code in GStreamerPlayer.cpp from m_pipeline =…"
Jul 29
Patrick Duffy left a comment for Peter Lambrecht
"Hello Peter, you can email me questions at duffy.papa@gmail.com.    i'd b happy to answer if i can. What projects are you interested in? Regards, Patrick"
Jul 23
Jeff Ward commented on Patrick Duffy's blog post How to setup a Mission Planner HD-Video HUD using GStreamer and Mission Planner plugins
"I have qt-gstreamer source from freedesktop.org which is the same as github.com/GStreamer/qt-gstreamer by George Kiagiadakis which is no longer maintained. Diane Trout has been maintaining github.com/detrout/qt-gstreamer which is used…"
Jul 9
Patrick Duffy commented on Patrick Duffy's blog post How to setup a Mission Planner HD-Video HUD using GStreamer and Mission Planner plugins
"@Jeff, Have you built the code from the Freedesktop.org source?  I don't think you should need a custom version now, as I think the bugs were fixed. The changes I made were hacks. I think I already updated my code to the latest version. I…"
Jul 9
Jeff Ward commented on Patrick Duffy's blog post How to setup a Mission Planner HD-Video HUD using GStreamer and Mission Planner plugins
"You mentioned that you included your custom version of QtGstreamer in your source tree but I haven’t been able to find it after searching projects here and dropbox links mentioned in this thread. I’m hoping that might be key to…"
Jul 7
Jeff Ward commented on Patrick Duffy's blog post How to setup a Mission Planner HD-Video HUD using GStreamer and Mission Planner plugins
"Since my last comment, I found implementations for plugin_init() and gst_qt_quick2_video_sink_update_node() in qt-gstreamer but I haven’t yet figured out why they are not found upon compiling main.cpp."
Jul 7
Jeff Ward commented on Patrick Duffy's blog post How to setup a Mission Planner HD-Video HUD using GStreamer and Mission Planner plugins
"Since my last post, I found implementations for plugin_init() and gst_qt_quick2_video_sink_update_node() in qt-gstreamer but I haven’t yet figured out why they are not found upon compiling main.cpp."
Jul 7

Profile Information

About Me:
I am a Sr. Software engineer for ETS-Lindgren and work on antenna analysis software for the wireless industry.
Please tell us a bit about your UAV interest
I have a plane with ArduPilot, and am interested in development for this project.
Hometown:
Manor, TX

Patrick Duffy's Blog

Thermal Imaging for your Drone on a Budget

Posted on May 6, 2017 at 12:13am 68 Comments

This blog will describe how to add thermal imaging to your drone without breaking the bank! The above photo shows my drone with the thermal imaging camera, the FlirOne device, which is an inexpensive, lightweight…

Continue

Google Cardboard Head-Up Display for Android

Posted on July 12, 2016 at 2:26pm 17 Comments

Google Cardboard your Drone!

This is a new Android App for running a Heads Up Display on a SmartPhone using Google Cardboard glasses to hold the smart phone.

I have posted a free version on dropbox…

Continue

Chinese drone maker Ehang Inc. Unveiled World's first drone capable of carrying a human passenger.

Posted on January 6, 2016 at 4:26pm 43 Comments

LAS VEGAS (AP) — Chinese drone maker Ehang Inc. on Wednesday unveiled what it calls the world's first drone capable of carrying a human passenger.

The Guangzhou, China-based company pulled the cloth off the Ehang 184 at the Las Vegas Convention Center during the CES…

Continue

Ford issues $100000 challenge for developers to create drone to vehicle communication system

Posted on January 5, 2016 at 8:00pm 27 Comments

Here's the :Link

The news release said, "CEO Mark Fields said a goal is to set up a system, for example, where a…

Continue

Comment Wall (6 comments)

At 9:12am on January 28, 2015, Warren Fernandes said…

Hey Patrick,

The issues that we're facing are not really related to the video link, that's perfect. Our telemetry link that uses zigbee 900's for communication completely stops transmitting as soon as the plane takes off. The connection comes back as soon as the plane lands, also our plane is built out of carbon fiber which we assumed was blocking the signal from our top mounted antenna. However shifting the antenna to the bottom of the plane hasn't helped. We've range tested our zigbee's and they seem to have no problem communicating over long distances, which has left us quite puzzled. Do you have any idea why this might be happening? I'll sent you pictures of the plane tomorrow!   

At 10:34am on January 28, 2015, Patrick Duffy said…

Hello Warren.  I have a similar setup on one of my fly wings. 5.8ghz video / 900mhz telemetry with zigbee. It's an EPO foam plane, so I have no issues with the carbon fiber, however, you should not have an issue if the antenna is bottom mounted. I would be interested to see your setup. It does sound strange. Have you eliminated cabling problems or connector issues? From your description of the problem, it appears that the actual radiated power is very low and it works as soon as the receiver gets close to the transmitter on the ground. I would try just walking the plane away from the CGS to see when it drops. 

For my latest build, I have both video and telemetry going over 5ghz digital so I have eliminated the 900mhz and extra electronics/antennas.  Are you using analog video or HD? Maybe you should consider eliminating the 900mhz link altogether. 

At 12:50am on January 30, 2015, Warren Fernandes said…
We're using HD video and we're definitely considering using the wifi link to transmit telemetry. However, we wanted the two separate radio links as a failsafe. We've tested our 900MHz system at fairly large distances (~1km) and it works perfectly outside the aircraft. The problem only crops up when the electronics operate inside the airplane :P.
Thanks for the help, I'll send you pictures of our setup soon so that you get a better idea of what our setup looks like.
At 6:24am on June 4, 2015, Paul Meier said…

Hello Patrick, stumbled on this in the http://diydrones.com/forum/topics/3-km-hd-fpv-system-using-commodity-hardware tread:

http://www.msdist.co.uk/product_Ubiquiti-WispStation-M5.php

seems its the same specs as the bullet, no need to mod for the antenna

At 4:10pm on March 31, 2017, Ashley Webb said…

@Patrick, I have PI 3 but I can pick up a PI 2 if there are any issues with the image running on a 3. Thanks so much!!!

At 6:11am on February 7, 2018, Andreo Zak said…


Hello. Do you work with skywalker x8 model? I'm interested in wings or airframe. If they are available, I would have gladly purchased them. Also if you have accessories, I’m ready to discuss all the details.
Answer send me an email: rybak.uav1975@gmail.com

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service