Hello,i want connect at least 4 Potis at Ardupilot Breadboard (i have only the red Board) and send its values via USB to PC.USB-Transmit works in steps of 1,5 sec but i think there has to be a…Continue
Hallo,I use 1.1.73 and AC 2.5.4If I check Tune CH6_Loiter_P the Loiter P don´t change, it Changes the Loiter speed.In what unit is Loiter speed? m/s?And is Loiter P with 2.0 default normal before it…Continue
Hallo,today I have used the MP and tune Travelspeed.I set value min to 0 and max to 6.0Then I change the value via ch7 and read the params again.if i´m on 0 it´s 0 if I put it put to 100% it´s not 6…Continue
I have a Atmega1280 Board with the IMU. On uploading the firmware 2.0.41 from Arducopter I get an error in MP.
After this MP can´t get my AMP version. So I decided to test it with arduino 22 and I get this error:
avrdude: stk500_getsync(): not in sync: resp=0x00
I testet many times and read many threads.