There are individuals who push tools, materials, and craftsmanship to the limit in the world of micro RC aircraft, and [Martin Newell] gives some insight into the kind of work that goes into…
597 members
1456 members
178 members
Started this discussion. Last reply by elad orbach Jan 16. 159 Replies 74 Likes
Well first of all I'll start with the reason I chose to build this ground station instead of using a laptopSo after many times of carrying the laptop around assembling and disassembling parts and…Continue
Tags: ground-control-station, station, uav-station, ground, gcs
Started this discussion. Last reply by Yun Youngjun Aug 20, 2013. 12 Replies 0 Likes
helloafter takeing the bosch 085 bro out putting instead ms5611 i2c 3.3vthanks to Frank Al for sharing this …Continue
Started this discussion. Last reply by elad orbach Nov 20, 2012. 2 Replies 0 Likes
The VN-200 is a miniature high-performance GPS-Aided Inertial Navigation System that combines MEMS inertial sensors, a high-sensitivity GPS receiver, and advanced Kalman filtering algorithms to…Continue
Started this discussion. Last reply by elad orbach Nov 14, 2011. 3 Replies 0 Likes
himy problem is a little odd when i connect the ftdi usb cable all is well and working without the xbeeand when i try to connect it to a battery 9v or power supply same voltage 1a nothing is…Continue
Tags: problem, power, ardustation
Posted on February 10, 2017 at 12:30pm 6 Comments 12 Likes
There are individuals who push tools, materials, and craftsmanship to the limit in the world of micro RC aircraft, and [Martin Newell] gives some insight into the kind of work that goes into…
Posted on February 9, 2017 at 5:30pm 5 Comments 2 Likes
Posted on August 14, 2016 at 3:05am 9 Comments 1 Like
Posted on April 12, 2016 at 2:30am 8 Comments 4 Likes
They have done it again, Festo thinking out of the box.
Both gripping and flying have long been a topic for the Bionic Learning Network. In the FreeMotionHandling, Festo has for the first time combined both areas. The indoor flying object can manoeuvre…
Hi Elad,
Happy newyear to you too!
Some question first:
- What version arducopter are you using ?
- what in fact *is* the problem ?
- did you tripple-check all connections ?
- do you have access to a scope ?
I will see if I have some testprogram still around. I used it while developing this patch. It might help to isolate the problem.
Regards, Frank
Hey Elad, I was wondering if I could get your approval to put a picture of your completed ground control station on my Senior Design project. I am also making a ground control station.
Added by elad orbach 0 Comments 0 Likes
Added by elad orbach 0 Comments 1 Like
1456 members
246 members
367 members
239 members
498 members
© 2018 Created by Chris Anderson.
Powered by