"The transition begins to occur after about 10 seconds, and the transition itself only takes about 10 seconds as well. I will finish coding my roll and pitch drift correction and see if that fixes the problem. I'll be back if it does…"
nbaer89's Discussions
Problem with my DCM need some help.
Started this discussion. Last reply by nbaer89 Nov 16, 2011. 2 Replies 0 Likes
Hi there,I have been implementing the DCM algorithm for use with an LPC1769 board in the LPCXpresso environment and so far it has been going smoothly and this forum has been a great help, however…Continue
nbaer89's Page
Latest Activity
T3William Premerlani replied to nbaer89's discussion Problem with my DCM need some help.
"Hi,
How long is "after a while"?
Without drift compensation, the axes will seem to switch. I have seen it quite often during my work.
What is probably happening is the estimated orientation is slowly tumbling. This makes it feel like the…"
nbaer89 posted a discussionProblem with my DCM need some help.
Hi there,I have been implementing the DCM algorithm for use with an LPC1769 board in the LPCXpresso environment and so far it has been going smoothly and this forum has been a great help, however I've run into a problem.I'm just starting to use the pitch of my imu to control a servo. Unless I am mistaken I believe the Rzx element is used to control pitch. Right now i use that element and a setpoint of zero in my PID loop to control a single servo. When I first start the code it seems to work…See More
Profile Information
- About Me:
- Electrical engineer senior at CSU Chico. Working on designing my own autopilot for my senior project.
- Please tell us a bit about your UAV interest
- Always loved flying and as an electrical engineer I've been obsessed with automation. I've worked on micro mouse competitions and now entering into the UAV field.
- Hometown:
- Sacramento, CA
Comment Wall
- No comments yet!
Top Discussions
Groups
-
UgCS
241 members
-
ArduRover User Group
611 members
-
ArduCopter User Group
3138 members
-
ArduPlane User Group
1456 members
-
ArduBoat User Group
246 members
© 2018 Created by Chris Anderson.
Powered by
