Full autonomous flight mission with the Cheerson CX-20 auto-pathfinder

Here a test video of a FULL AUTONOMOUS MISSION under flight plan (in Mode AUTO) with the Cheerson CX-20 (Quanum NOVA).
The ALTHOLD flight mode (factory default) of the CX-20 has been changed into the AUTO mode with the mission planner.
The WP_YAW_BEHAVIOR parameter has also been changed to 2 so as the CX-20 heading is locked towards the next Waypoint.
With this feature enabled, the on board GoPro 3 camera is able to look forward during the flight. There is no Gimball stabilization in this test setup.

A flight plan (FPL) of 8 waypoints has been uploaded to the CX-20 autopilot (an APM v2.5.2 loaded with the firmware ArduCopter v3.1.2) and then the AUTO mode has been enabled.
The Take Off and the Landing sequence is fully automated. There is no action of the pilot during all the flight until the stop of the motors. All the flight is fully automated.
Wind conditions: 19 Km/h, gusting 31 Km/h

More infos at:

Views: 308


You need to be a member of DIY Drones to add comments!

Join DIY Drones

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2020   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service