On board video during an autonomous mission under flight plan with the Maxi Swift flying wing

Here a video of an autonomous mission flight with a Maxi Swift flying wing piloted by the firmware ArduPlaneNG v2.x R5 with an All In One Pro (AIOP) full IMU board. The video has been taken with an EVO HD Cam sports video camera. The flight plan has been defined with 5 waypoints and runs in closed loop around the airfield.

The wind was blowing at 15 km/h gusting 20 km/h.

Avionic setup:
- IMU board: All In One Pro (AIOP) v1.0 from CRIUS
- GPS: Crius CN-06 (Ublox NEO-6)
- AirSpeed sensor: MPXV5004DP
- firmware ArduPlaneNG V2.x R5, porting of the ArduPlane v2 + special addons for the AIOP v1 full imu board by JLN
- Flying Wing: Maxi Swift from MS Composite (1m40 wingspan)
- brushless motor Spitz 30 850 kV, 360W
- propeller GWS 10x4.5
- Lipo: 3S EVO25 2650 mAh
- Receiver: Turnigy 9X8C v2
- Transmitter: Turnigy 9x with eR9x firmware
- video camera: EVO HD Cam sports

More infos at:
http://diydrones.com/profiles/blogs/autonomous-flight-mission-with-the-arduplaneng-v2-x-r5-and-aiop

Views: 510

Comment

You need to be a member of DIY Drones to add comments!

Join DIY Drones

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service