A little demo of FPV for those who are interested but haven't done it and a comparison of hi-def video and the low resolution video transmitted back for the ...
This OSD was the EZ-OSD and it was a good choice where the NAZA is involved like on the FW-450 that i used in this video. . I like it for its simplicity and it is a good fit when you are using a NAZA. The NAZA has no data port to supply data like altitude, speed, direction etc, although it has that data, it doesn't share it. Although the EXOSD does a nice job, it has its own GPS, and doesn't have a magnetometer, therefore the direction to the pilot arrow only is accurate when moving. When you hover stationary it looses its sense of direction. The NAZA also doesn't share data with regards to battery consumption so an current sensor is also required when using the EZOSD with the NAZA. This adds weight and duplicity. To compare the MinimOSD and the EZOSD is not apples for apples. the MinimOSD gets all its data from the APM and so is much lighter and has a much more complete set of options in what it can display. for the Arducopter I got, I received the MinimOSD, but haven't gotten it installed yet, but I have heard it is complicated, so I can't make that comparison.
Thanks for the nice demo.
I noticed your amateur radio call sign being displayed periodically. Did you program that into the EZ-OSD?
Yes, it is a standard function of the EZOSD, you just type it in and it takes care of broadcasting it at 1 minute intervals, as well as the accumulated flight time. Also, not seen here is a fight statistics summary at the end of the flight that gives information like distance traveled, max altitude, max speed and other info.
There is a funny thing about that summary. The default behavior is for the summary to appear when the aircraft comes to rest (assuming the end of flight) That works fine on a fixed wing, but when flying a quad, when it comes to a stable hover It thinks the flight is over and is triggered prematurely. Fortunately that behavior can be changed as an option so you have to manually press a button to get that display. Thats the way I have it set.
Join DIY Drones
Welcome toDIY Drones
Sign Upor Sign In
Or sign in with:
© 2018 Created by Chris Anderson.
Report an Issue |
Terms of Service
Please check your browser settings or contact your system administrator.