Gender
Male
About
Location
Haifa
About Me:
i love UAV's and FPV ...
Please tell us a bit about your UAV interest
i love UAV's and FPV ...
Hometown:
Haifa, Israel
Activity Feed
"hello
I would appreciate very much any advice about photography flights mapping. Such as the recommended height, speed, time between frames and anything else I have not thought about. Thank you."
I would appreciate very much any advice about photography flights mapping. Such as the recommended height, speed, time between frames and anything else I have not thought about. Thank you."
"hi all
i have this tablet :
http://www.dx.com/p/icoo-d70proii-7-capacitive-screen-android-4-1-1...
when connecting to OTG a mouse / usb flash drive and such they all work fine.
when connecting the 3DR modem and starting the andropilot tool i get…"
i have this tablet :
http://www.dx.com/p/icoo-d70proii-7-capacitive-screen-android-4-1-1...
when connecting to OTG a mouse / usb flash drive and such they all work fine.
when connecting the 3DR modem and starting the andropilot tool i get…"
"been published in the apm thread on rcg.
it is a log analizer.
http://www.rcgroups.com/forums/showatt.php?attachmentid=6701452&......"
it is a log analizer.
http://www.rcgroups.com/forums/showatt.php?attachmentid=6701452&......"
"Ok. Looksllike only blades are destroyd. I was luck.
Tested today hover and eight shape with only rx .. No auto pilot and stab.
Ready to rock n roll."
Tested today hover and eight shape with only rx .. No auto pilot and stab.
Ready to rock n roll."
"Thank you robert ..
But now i will need to wait for the parts to get here .. As the hk sites have an avg shipping time of 5 weeks ... I think a lot will happen until i will try again..
Thanks."
But now i will need to wait for the parts to get here .. As the hk sites have an avg shipping time of 5 weeks ... I think a lot will happen until i will try again..
Thanks."
"i found the full param list ... it appears to be collapsed ..."
"i posted it there .. but never got an answer on that forum.
:("
:("
"yes .. i did check the fix for stabilization ..
it worked even when not armed. in fact everything worked when not armed but the motor.
i am not sure if there is a new firm ware or what but i never found something like i have in my mp in the wiki…"
it worked even when not armed. in fact everything worked when not armed but the motor.
i am not sure if there is a new firm ware or what but i never found something like i have in my mp in the wiki…"
"Ok .. That didnt go so well ... The moment the heli got off the ground .. Crazy left to the ground ...
I took the gaind for pitch and roll down from what was defoults .. Also in mp the vibrations stayd under -1 ... Also was very carefull .. But…"
I took the gaind for pitch and roll down from what was defoults .. Also in mp the vibrations stayd under -1 ... Also was very carefull .. But…"
"hi
i am failing to understand .. sorry .. but the manual ( and you david ) talk about mode_1 ..
i dont have it !
i also dont have full param list ...
https://www.dropbox.com/s/dh1pyskjrqwf0ut/mp1.png…"
i am failing to understand .. sorry .. but the manual ( and you david ) talk about mode_1 ..
i dont have it !
i also dont have full param list ...
https://www.dropbox.com/s/dh1pyskjrqwf0ut/mp1.png…"
"thank yiu david :)
i dont havve the full param list in this heli installation .. i dont know why.
when i connect the hexa copter i do get it.
i updated the MP to last ver. and i got the ch8 in the rsc !
but i am puzzled about something.
ch8 of…"
i dont havve the full param list in this heli installation .. i dont know why.
when i connect the hexa copter i do get it.
i updated the MP to last ver. and i got the ch8 in the rsc !
but i am puzzled about something.
ch8 of…"
"wow !
only removed the corve from ch6 .. and everything is working incl. arm !
i still dont understand why :) ..
but in MP, the rsc is still empty.
i think i will reflash and install new MP
thank you so much !"
only removed the corve from ch6 .. and everything is working incl. arm !
i still dont understand why :) ..
but in MP, the rsc is still empty.
i think i will reflash and install new MP
thank you so much !"
"Hi David.
thank you.
the MP ver. is 1.2.97 build 1.1.5167.24804
the apm ver. is : arducopter v 3.1.3 ( on terminal page )
i guess i am missing something big here ...
all the right side of the heli settings in MP the pull down menues are empty,…"
thank you.
the MP ver. is 1.2.97 build 1.1.5167.24804
the apm ver. is : arducopter v 3.1.3 ( on terminal page )
i guess i am missing something big here ...
all the right side of the heli settings in MP the pull down menues are empty,…"
"Hi David. thank you for the comment.
my radio is set to plane mode. ( i am used to it since my copter x had sdk stabilizer ... )
i am not sure i got you. all i need to do on channel 8 is on/off ( high/low ) pwm signal ? is it like the throttle-cut…"
my radio is set to plane mode. ( i am used to it since my copter x had sdk stabilizer ... )
i am not sure i got you. all i need to do on channel 8 is on/off ( high/low ) pwm signal ? is it like the throttle-cut…"
"i am sitting all day reading the setup up instructions for the helicopter apm ... sure not easy ...
using this pages:
http://copter.ardupilot.com/wiki/traditional-helicopter-connecting-..."
using this pages:
http://copter.ardupilot.com/wiki/traditional-helicopter-connecting-..."
