About

Gender

Male


Location

Sofia


About Me:

Electronics engineer. Diver and Pilot.


Please tell us a bit about your UAV interest

UAV design for photo and video applications.


Hometown:

Sofia


Activity Feed

Vesselin Goranov replied to Sriram's discussion Pixhawk Stability in PIXHAWK
"When I'm testing new drone, especially large one, always doing tethered flight tune. This ensures good stable flights, and no risk to break the new "bird". Moreover I'm living near the airport, where test flights are not possible.
This way you…"
Mar 24, 2017
Vesselin Goranov left a comment on PIXHAWK
"Most items I'm buying from Hobbyking.They doing well in Europe."
Mar 24, 2017
Vesselin Goranov replied to Peter Arnold's discussion Pixhawk Hex Take Off Stability problems in PIXHAWK
"Hi,
Seems you do not have good accelerometer calibration. I have same issue when move the copter to different location - 20-30 km or more from the previous calibration site.
You should first calibrate the compass and then accelerometer in all…"
Mar 2, 2017
Vesselin Goranov replied to electrolics inc's discussion ugcs open license photogrammetry disabled? in UgCS
"Thanks a lot!
I have educational photogrammetry project and the prize will more than helpful !"
Mar 1, 2017
Vesselin Goranov replied to electrolics inc's discussion ugcs open license photogrammetry disabled? in UgCS
"I can guess 41 man years for the development."
Feb 25, 2017
Vesselin Goranov replied to seyedali's discussion Pixhawk capability in PIXHAWK
"Yes, Pixhawk is very reliable and easy to implement in almost any configuration of octacopter.
But one issue have to note - unmanned copter above 25 kg is not allowed to use in most countries due to number of regulations. You should have special…"
Feb 25, 2017
Vesselin Goranov replied to Tyler Troutt's discussion Starting PID Values for Larger Quads in Pixhawk 2 User Group
"The tethered tuning must be done outside, between two poles or trees. It is must on large drones. Extended cables are OK, if they do not interfere too much with the compasses of the flight controller.
How to avoid and reduce the power cables…"
Dec 21, 2016
Vesselin Goranov replied to Tyler Troutt's discussion Starting PID Values for Larger Quads in Pixhawk 2 User Group
"Hi,
I am using tethered set with bungee for all new frames and controllers, for precise manual tune of the PIDs before the first flight.
You can look at my post here.
The procedure is well described here."
Dec 20, 2016
Vesselin Goranov replied to Rob_Lefebvre's discussion AC3.3 Vibration Logging Discussion Thread
"The props making different vibrations, but it is easy to measure those by the smartphone apps like Seismograph.
Y vibrations can be caused by many factors, but seems there the folding legs are the source.
Z vibrations are normal.
Anyway, it is…"
May 19, 2016
Vesselin Goranov replied to Rob_Lefebvre's discussion AC3.3 Vibration Logging Discussion Thread
""Clip" represents the max level, the sensors and EKF can manage - it is like the sound, when the level is too high, the amplifier is overloaded, cannot reproduce and "clips" - i.e. cuts the signal.
Looking at the clip diagram, can see how many times…"
May 19, 2016
Vesselin Goranov replied to Rob_Lefebvre's discussion AC3.3 Vibration Logging Discussion Thread
"Thanks for the beer proposal! I appreciate that ;-)  Never been at Cape Town, and planning to come.
Now the controller seems OK, you can try new autotune for sure - can return existing params anytime. Also can reduce the weight to 20 grams, will be…"
May 18, 2016
Vesselin Goranov replied to Rob_Lefebvre's discussion AC3.3 Vibration Logging Discussion Thread
"The good results are with 20-30 grams piece of lead glued below the top plate. It gives the controller platform more inertia.
Rubber dampers cannot work without enough weight."
May 17, 2016
Vesselin Goranov replied to Rob_Lefebvre's discussion AC3.3 Vibration Logging Discussion Thread
"Do you have some lead weight below your top damping plate?"
May 17, 2016
Vesselin Goranov replied to Randy's discussion Copter-3.3 beta testing
"Randy is right as usual, but he is a brave man ;-)
I am not and would like a calm controller..."
May 16, 2016
Vesselin Goranov replied to Gerhard Laubscher's discussion Vibe Xok Ybad IMU problem
"Hi,
Here is link that may help: http://ardupilot.org/copter/docs/common-vibration-damping.html

The sensors orientations are there.
So standard (0 = No rotation) X is front/back, and Y is left/right direction.
Too aggressive PIDs can cause more…"
May 16, 2016
Vesselin Goranov replied to Randy's discussion Copter-3.3 beta testing
"I sent you reply in the other thread: too much Y vibrations."
May 16, 2016
More…