Gender
Male
About
Location
Aldershot
About Me:
Programmer, Developer, Electronics Engineer and hobby as flight.
Please tell us a bit about your UAV interest
RC Flight Explorer, Weight, Eff, Batteries
Hometown:
Aldershot
Activity Feed
"2200kv @ 30A will but it depends on the motor and props for lift..2200kv is usually a small profile motor for about a max of 8 inch props and at that wattage 2 or 3 cell you are looking around sort of 15 mins flight time on a quad or tri."
"but it also depends on the motors used, in hover @ low altitude iam drawing about 8 - 9 Amps total, above 100ft less throttle to hover, educated guess at about 6 - 7 Amps total.."
"1.3k is your problem, if you get the down to <1Kg inc the bat then you will be impressed !"
"UT, iam using 10x10mm square so shouldent twist but good suggestion... thank you !"
"Marc you are quite right, but when the next one is done it will have auto leveling, my large one for FPV uses 50cm arms, 800kv, 1047 GWS 3300mA 25 - 30 mins filght time, using the APM v1, but i wonted to build a mini one for indoor, and test…"
"Since 1000mA only give me 7 mins flight, 850 wont give me more, but less, after testing different ones i have come to the conclusion that a 1300mA is the best one and inc bat weight 250g +- 10g based on how i mount it !
Besides this is only a…"
Besides this is only a…"
"For the next final version, less fiberglass for body ie a reshape use carbon fiber square tubeing for arms and using it for the back end yaw, if possiable maybe carbon fiber body but carbon fiber coated balsa wood ?? any suggestions ?"
This version is to get an idear of the items required for the next version the physical size and strength require powerfull motors to lift the weight:250g +- 10g5x3 GWS (2x CCW 1x CW)1x Turnigy 3S 1300mA3x Turnigy 2211 Brushless Indoor Motor…
