Location
Sydney, NSW
About
Please tell us a bit about your UAV interest
I've done several hours on a little ARQ to get stick-time. I want to take nice stills and video, especially using Follow-Me then likely some FPV.
Hometown:
Sydney
Activity Feed
"Calibrate your accelerometer."
"This sounds like an accelerometer issue.
The accelerometer is what determines what is "level" - so if it was calibrated incorrectly then you will get the behaviour you describe.
Do an accelerometer calibration - very easy and quick to do - then…"
The accelerometer is what determines what is "level" - so if it was calibrated incorrectly then you will get the behaviour you describe.
Do an accelerometer calibration - very easy and quick to do - then…"
"I'm afraid you're the danger here and not following any correct procedure I've ever read for any RC device.
You should ALWAYS disable the copter power, either via (dis)arming button or more certainly by disconnecting the battery BEFORE turning off…"
You should ALWAYS disable the copter power, either via (dis)arming button or more certainly by disconnecting the battery BEFORE turning off…"
"Why wouldn't you adjust the existing geofence?
It doesn't allow for loiter at present, but could be worked around.
Or only let them use the right stick in loiter mode ;-)"
It doesn't allow for loiter at present, but could be worked around.
Or only let them use the right stick in loiter mode ;-)"
"^^^ THIS is what reassures me about buying from 3DR ^^^"
