Gender
Male
About
Location
Asunción
About Me:
I'm a Civil Engineer interested in the applications of Drones in the job.
Please tell us a bit about your UAV interest
I'm a Civil Engineer interested in the applications of Drones in the job.
Hometown:
Asunción - Paraguay
Activity Feed
"Thanks Craig,
I'll post it there too.
Regards,
Esteban Caligaris"
I'll post it there too.
Regards,
Esteban Caligaris"
Hello everyone,I would like to share with you some troubles I'm having using the ArduBoat in Auto Mode. The thing is that I need to move my boat from one waypoint to another, but I need it to stay in each waypoint for a while, so I'm using the delay…
"Hi all,
I've managed to solve this problem with some coding reviewing and tests. This is the code that worked for me:
//Make sure to install the adafruit GPS library from https://github.com/adafruit/Adafruit-GPS-Library#include <Adafruit_GPS.h>…"
I've managed to solve this problem with some coding reviewing and tests. This is the code that worked for me:
//Make sure to install the adafruit GPS library from https://github.com/adafruit/Adafruit-GPS-Library#include <Adafruit_GPS.h>…"
"@C K:
You should try uploading the firmware again and see if, maybe, your vehicle is DISARMED when the blue lights are blinking.
For further understanding of your problem you could attach your DATA LOGS and someone could take a look into it.
Regards."
You should try uploading the firmware again and see if, maybe, your vehicle is DISARMED when the blue lights are blinking.
For further understanding of your problem you could attach your DATA LOGS and someone could take a look into it.
Regards."
"Hi Gilles!
Yes! I'm attaching the Pixhawk this way:
The Battery I'm using connects to the Power Module (PM) and the PM goes to the Power Port available at the Pixhawk.
The ESC I'm using it's wired to the PM and to the Main Out #3.
The Motor I'm…"
Yes! I'm attaching the Pixhawk this way:
The Battery I'm using connects to the Power Module (PM) and the PM goes to the Power Port available at the Pixhawk.
The ESC I'm using it's wired to the PM and to the Main Out #3.
The Motor I'm…"
"Hi Guy,
Thanks for the reply. I have actually bought the Arduino Mega and I'm going to give it a try.
Regards,
Esteban Caligaris"
Thanks for the reply. I have actually bought the Arduino Mega and I'm going to give it a try.
Regards,
Esteban Caligaris"
Hello everybody,I'm attempting to use the Serial 4/5 Port of Pixhawk to connect to it a device that outputs NMEA sentences, but is not a GPS, is a Garmin Sonar.I want to know if there is a way to read these sentences in Mission Planner in real…
Hello everybody,In previous post, I have presented autonomous boat based on the Pixhawk. Currently I am troubleshooting the connection between my Garmin intelliducer and Adafruit GPS datalogger, as was done previously by Thomas J Coyle III and…
"Hi there seno nugroho.
The problems I had were due to electromagnetic fields that were emanated from all the electronics that surrounded mi GPS Module, as I had all of the components stored in only one plastic container. My problems were solved by…"
The problems I had were due to electromagnetic fields that were emanated from all the electronics that surrounded mi GPS Module, as I had all of the components stored in only one plastic container. My problems were solved by…"
"Thanks for your reply Richard!
I'll give it a look and a try.
Regards,
Esteban Caligaris"
I'll give it a look and a try.
Regards,
Esteban Caligaris"
Hi everyone,I am writing to ask you about what materials would you recommend using in a boat.My idea is to give shape to the hull with foam and then coat it with fiberglass.The foam will be molded using a cutting numerical control machine (CNC) and…
"Hi there Darius.
The Steering, in everything moving with the impulse caused by a fan, is achieved by redirecting the the direction of the impulse, in this case, the air. That can be done with rudders or with the redirection of the thrusters.
Anyway,…"
The Steering, in everything moving with the impulse caused by a fan, is achieved by redirecting the the direction of the impulse, in this case, the air. That can be done with rudders or with the redirection of the thrusters.
Anyway,…"
"Thank you very much everyone for your contributions.
I have solved my problem.The problem I had was due to electromagnetic interference, caused by having all components crammed into the same container.
Initial distribution of electronics (All in one…"
I have solved my problem.The problem I had was due to electromagnetic interference, caused by having all components crammed into the same container.
Initial distribution of electronics (All in one…"
"Hello everybody.
So, my friend was analyzing my Logs and he found this about the Yaw:
AHR2 - Yaw:
ATT - Yaw:
EKF1 - Yaw:
And the HDop Logs from the GPS are these:
Could have been these the reasons of my troubles?
Thanks for all.
Regards
Esteban…"
So, my friend was analyzing my Logs and he found this about the Yaw:
AHR2 - Yaw:
ATT - Yaw:
EKF1 - Yaw:
And the HDop Logs from the GPS are these:
Could have been these the reasons of my troubles?
Thanks for all.
Regards
Esteban…"
"@David Boulanger
Thanks for your time.
Regards
Esteban Caligaris"
Thanks for your time.
Regards
Esteban Caligaris"
