John Stuart's Discussions (38)

Search Forum

View

Discussions Replied To (34) Replies Latest Activity

"I'm having the same issue, cannot calibrate my accelerometers: mine is an APM2.0"

John Stuart replied May 18 to APM 2.5 sensor calibration problem

 2 May 18
Reply by John Stuart

"Larger props are also heavier and make your motors work harder, ie there is also an…"

John Stuart replied May 18, 2012 to What's the best prop and prop size for hexa with 880kv motors?

 13 Oct 13, 2012
Reply by James Dinh

"Why be scared? You can just flick the switch back to stabilize if anything looks lik…"

John Stuart replied May 2, 2012 to arducopter 2.5.4 outstanding loiter mode as good as wkm

 7 Jun 14, 2012
Reply by Eagle Wong

Developer

"Tuning also works on the 1280, although you will have heard that the CLI is not avai…"

John Stuart replied Apr 25, 2012 to ArduCopter 2.5 released!

 1708 Dec 21, 2012
Reply by Emin Bu

"If you don't have telemetry logging is not possible. Logging live flight data requir…"

John Stuart replied Apr 21, 2012 to Datalog problem

 5 Aug 4, 2012
Reply by Vernon Barry

Developer

"As a clarification on my previous comment re loiter tuning: from the forum posts it…"

John Stuart replied Apr 21, 2012 to ArduCopter 2.5 released!

 1708 Dec 21, 2012
Reply by Emin Bu

Developer

"Randy wrote: "Revisiting loiter.  Evidence suggests we can get better loiter perform…"

John Stuart replied Apr 20, 2012 to ArduCopter 2.5 released!

 1708 Dec 21, 2012
Reply by Emin Bu

Developer

"Even if you don't have a potentiometer on your radio, even a 3-position switch can w…"

John Stuart replied Apr 20, 2012 to ArduCopter 2.5 released!

 1708 Dec 21, 2012
Reply by Emin Bu

"This is not widely practised at present due to the cost of FLIR cameras and the risk…"

John Stuart replied Apr 2, 2012 to What would it cost...

 4 Apr 2, 2012
Reply by Tobias Krieger

"hi Richard What I meant by 'payload capacity' is not just the power of the quad but…"

John Stuart replied Mar 31, 2012 to Buy a Quadrotor RTF or build an Arducoptor 3DR

 3 Mar 31, 2012
Reply by John Stuart

RSS

Social Networking

Top Content 

1 APM Project vs DJI NAZA and WOOKONG

APM Project vs DJI NAZA and WOOKONG
2 APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)

APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)
3 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
4 Flying 3D Spline Curves between Waypoints with ArduCopter 3.0

Flying 3D Spline Curves between Waypoints with ArduCopter 3.0
5 ArduCopter-3.0 ready for wider use

ArduCopter-3.0 ready for wider use
6 10k autonomous flight - telemetry guided flight, and other APM tests!

10k autonomous flight - telemetry guided flight, and other APM tests!
7 Drone shot down by police

Drone shot down by police
8 MAAT final version is being tested

MAAT final version is being tested
9 Getting ready for Arducopter 3.0

Getting ready for Arducopter 3.0
10 Help Tuning Arduplane 2.73 With A Large Slow Airframe

Help Tuning Arduplane 2.73 With A Large Slow Airframe

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service