Rz_Ten1's Discussions (78)

Search Forum

View

Discussions Replied To (74) Replies Latest Activity

"Hi.  I'm in Englewood and I've been flying for awhile, although not all that much as…"

Rz_Ten1 replied Apr 24, 2012 to Needing help in Denver

 1 Apr 24, 2012
Reply by Rz_Ten1

Developer

"I was having some issues with my quad when I first built it, which might be similar…"

Rz_Ten1 replied Dec 30, 2011 to Arducopter 2.1 release

 670 Feb 18, 2012
Reply by Owen Booth

"I would guess no on the motor.  A bad ESC could be passing a lot of EMI back on the…"

Rz_Ten1 replied Dec 22, 2011 to Crash and freeze

 58 Nov 5, 2012
Reply by Randy

"A stalled motor is a motor that cannot spin, even though the ESC is trying to make i…"

Rz_Ten1 replied Dec 22, 2011 to Crash and freeze

 58 Nov 5, 2012
Reply by Randy

Developer

"I'm not sure that's an I2C failure.  All my I2C failures resulted in the motors rema…"

Rz_Ten1 replied Dec 20, 2011 to Arducopter 2.1 release

 670 Feb 18, 2012
Reply by Owen Booth

"If the motors are screeching (as you said in the original post) they're still trying…"

Rz_Ten1 replied Dec 20, 2011 to Crash and freeze

 58 Nov 5, 2012
Reply by Randy

"It's possible.  It's kinda hard to check the baro since you'll need to cook the boar…"

Rz_Ten1 replied Dec 20, 2011 to Crash and freeze

 58 Nov 5, 2012
Reply by Randy

"Couldn't hurt.  What I would recommend is trying to see if you can get it to lock up…"

Rz_Ten1 replied Dec 19, 2011 to Crash and freeze

 58 Nov 5, 2012
Reply by Randy

"I'm not 100% certain, but my best guess is no.  Almost all of the parts on the board…"

Rz_Ten1 replied Dec 19, 2011 to Crash and freeze

 58 Nov 5, 2012
Reply by Randy

"Also, it might be worthwhile to try the motor rev test.  This works better with the…"

Rz_Ten1 replied Dec 19, 2011 to Crash and freeze

 58 Nov 5, 2012
Reply by Randy

RSS

Social Networking

Top Content 

1 ArduPlane 2.73 released

ArduPlane 2.73 released
2 Mapping Mission Ride Along

Mapping Mission Ride Along
3 HD video for UAV's

HD video for UAV's
4 Arducopter 3Dr or Phantom

Arducopter 3Dr or Phantom
5 3 axis Camera Gimble connections.

3 axis Camera Gimble connections.
6 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
7 Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
8 ArduVTOL - Wingcopter - Flight Report Nr.1

ArduVTOL - Wingcopter - Flight Report Nr.1
9 How to analyze a crash?

How to analyze a crash?
10 ArduVTOL

ArduVTOL

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service