2 questions, first; anyone have a arduIMU v2+ eagle file?
Firstly i was wondering if anyone had an ArduIMU v2+ Eagle file.
Second question... If i have a different GPS that I would like to use, how can I connect it without using the EM-406 connector? can i simply connect my gps's TX line to the IMU's IN serial line?
Thanks for your thoughts,
Scott
Second question... If i have a different GPS that I would like to use, how can I connect it without using the EM-406 connector? can i simply connect my gps's TX line to the IMU's IN serial line?
Thanks for your thoughts,
Scott
Replies to This Discussion
-
Permalink Reply by marshall scholz on -
the best way to connect a non compatable gps is to hack one of these cables: http://store.diydrones.com/product_p/ca-0001-04.htm
as for the eagle file i cant help you, but what do you need it for?
-
Permalink Reply by Scotty on -
just making a small pcb to attach the GPS that i have. I was either going to get an eagle file so i could reverse engineer one, or i could just ask someone who might know.
-
Permalink Reply by Scotty on
-
from looking at the pdf (from the SFE website, found here) that shows both top and bottom layers of the pcb, i think i can connect my gps's serial out pin to the pin on the IMU labeled "OUT." does anyone know if you tap into that line will you get the GPS serial data or the IMU's serial data?
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
ArduCopter User Group
1292 members
-
ArduPlane User Group
684 members
-
Queensland
4 members
-
UK Ardupilot Group
110 members
-
ArduRover User Group
184 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
