We're sorry, but this discussion has just been closed to further replies.

config GS-407 ?

hello,

i have ordered the GS-407 .not in DIY-store, because out of stock...

must i changed anything in ublox config or i can use it with standard settings ? it´s possible to get a complete config-file for ublox-center ?

olli

Share Twitter

▶ Reply to This

Replies to This Discussion

Permalink Reply by Chris Anderson on November 22, 2009 at 12:20pm: You can't use it with ArduPilot in its standard settings. Follow the configuration instructions here...

Did you get the adapter board and cable from the DIY Drones store? You can't use the Ublox without them, either.; ▶ Reply to This

Permalink Reply by olli on November 22, 2009 at 12:32pm: thanks.... i will read it.

yes i ordered the adapter AND cable from DIY.ublox-center i have already installed

i understand right ? : i set all blue IDs to "on" and ALL rest IDs in red line on "off" ??? and the rest of config original leave ?

it´s possible for someone to read the complete config of ublox5 and send me per mail ? it is easier for me beginner.I do not pretend anything.

olli; ▶ Reply to This

Permalink Reply by olli on November 25, 2009 at 8:34am: has nobody a "configuration-file" (.txt file for ublox-center) for UBLOX 5 for me ? :-((

olli; ▶ Reply to This

RSS