Replies to This Discussion

Permalink Reply by LAIC on March 11, 2012 at 9:44am

Hi Chris

start mode : normal

tell me your experience with the turnigy plush 30A ESC's ; I don't like the " original " ESC's too much.

thanks a lot

Permalink Reply by Aerhead on March 11, 2012 at 10:51am

Chris

Google is amazing. I just typed in "Arducopter ESC settins" and I found the info you need.  So can you, maybe,  because Google searches are different when your in a different country in might not work for you.  Here's a link.

http://code.google.com/p/arducopter/wiki/Quad_ESC

Larry

Permalink Reply by Chris Kreuzer on March 11, 2012 at 2:53pm

thanks... but i want to know how to set the ESC... not how to calibrate

Permalink Reply by Chris Kreuzer on March 11, 2012 at 2:54pm

start mode normal... OK

And the timing? High?? 

Permalink Reply by Aerhead on March 11, 2012 at 3:47pm

Chris

I just did another search for "programming ESC quadcopter" and found a lot of info.  Here's the best link I found.  The information is good except that for motor timing.  The medium setting is often the best.  For higher motor kv the higher timing is often better.  If your motor starts hard or runs rough at low rpm try a different setting.  Low and medium are the most common settings.

Good luck

Larry

Permalink Reply by Aerhead on March 11, 2012 at 3:48pm

Chris

Opps I need to give yuou the link.

http://www.undcon.com/2011/04/01/turnigy-esc-programming/

Larry