"@Matic Jovanovic can you explain what the resistors that are necessary on your board do? Or am I fine without them. I understand resistors for the rc input but it looks like some others may be on board"
"I've got another question. I received your pcbs after ordering from oshpark. I'm getting a brown out powering the way I was with my receiver. How did you connect the power wires from the apm power module to the board you made?"
"Is ardupilot able to use brushed motors? Has this been used to make a brushed quadcopter as well? I see them using the motor drivers for mip etc but did not see an example of a brushed quadctoper made with this."
"@Mattic Jovanovic are you able to post pictures of both the front and the back of the pcb you had made. I have an idea of what i need to do. I also wanted to see what parts you populated on the board minus the mpu9250 and ms5611."
"so it turns out the voltage divider was not necessary. ended up using the same satellite receiver i thought i burned up and it has been fine. I had gone on a flashing spree with my 9xr recently and screwed alot of things up. I was able to get a…"
"@Partrick Portier I managed this without the voltage divider circuit but seem to be having some issues. my receiver seems to be detecting my transimitter as mode2. I get response from the right stick but none from the left. I am using a spektrum…"
I have a beaglebone black and started initially wanting to build my own arduino powered scratchbuilt edf jet. I then realized that ardupilot was being ported to the beaglebone black. I have compiled a realtime kernel on archlinux and have arduplane running and detecting my sensors. I just need my pixhawk firecape or direction on where to go from there.
saint elizabeth, jamaica
No comments yet!
You need to be a member of DIY Drones to add comments!