"I've been using the following combinations:
1. Taranis and the DJI 2.4 Data link for over a year once a week and have had no issues.
2. Graupner MC-32 and DJI 2.4 Data link for over two years now and have had no issues.
I'm using a Riegl RiCOPTER with a VUX-SYS (LiDAR and 2 x Sony A6000 cameras). I have a very similar calibration/ workflow as Eben's Phoenix System. The added "Area Scan" tool has been a big improvement for…"
"Im using UGCS with the Riegl RiCOPTER and the previous version allowed me to specify what to do when the battery was low, loss of GPS, loss of RF in each mission. Those options are now gone. Is there a way to select those options or is there a way…"
"If you search the internet...you'll find hundreds of designs for foamboard planes. The flighttest versa blunt is big enough for your looking for. I found this guy's designs several years ago - FPVTrond check out his youtube…"
I see that You are still pushing the limits of that Ardupilot 2.5. If You really need to fly routes that long, I would strongly suggest You getting a Pixhawk.
Anyway, to find the maximum amount of waypoints it can take, I would suggest You…"
"I reduced the number of waypoints/Segments to 21 as shown in the box above the lat long.
However, after calculating the route, the display shows the last waypoint is #70 (when you hover you mouse over the last waypoint)(see file upload-fail.jpg.
We investigated the log and it seems You are trying to upload a large route, could be consisting of more than 100 waypoints.
Please do try to upload a less complicated route (consisting of less waypoints and waypoint actions) and see if that…"
Thanks for Your question and interest in our software!
I have just tested mission upload from UgCS 2.8 to APM 2.5 running f.w. 3.2.1 and it did work.
May I please ask You to send me one log file - C:\Users\~Your…"
"I've got the same issue, but I'm running the new Ugcs 2.8.
So, if I understand you. For fw 3.2.1 upload is broke, and you don't recommend using Ugcs 2.7 with fw earlier the 3.2.1, and we should use 2.6.
Will the projected fix also…"
"It seems that Flying Buddha has fixed the issue by installing UgCS on a different laptop.
Unfortunately since we do not develop the VIsual C++ components ourselves and this is developed by Microsoft, we can not guarantee that the components will…"