Hans Miller
  • Male
  • New Zealand
Share Twitter

Hans Miller's Friends

  • Tomáš Frank
  • Farley Joseph
  • Stephen Gloor
  • Glenn M
  • james sowell
  • Jay Rama
  • Joshua Johnson
  • Toby Mills

Hans Miller's Groups

Hans Miller's Discussions

Maiden flight with APM 2.76 - Multiple issues

Started this discussion. Last reply by Hans Miller Nov 24, 2013. 2 Replies

Hi all,Finally managed to get a maiden flight with my X8 yesterday.The aircraft flies well in manual mode, the CoG is correct and everything works as it should. It is appropriately powered with a…Continue

Unintended consequences: A story of sonar and failing gyros

Started this discussion. Last reply by Richard Boyhan Aug 28, 2013. 1 Reply

 Hi all,I think today turned out to be the most interesting day of flying I've had for a while...   A friend owns a quad that is largely made up of recycled parts from an old 3dr quad I used to fly…Continue

APM Planner no aircraft location displayed.

Started this discussion. Last reply by Hans Miller Oct 26, 2012. 1 Reply

Hi, when I connect to the mission planner the apm board is showing  a 3D GPS lock but the aircraft symbol is not shown on the map and I'm unable to set home etc. This is happening on all the versions…Continue

Loading code with APM Planner?

Started this discussion. Last reply by Hans Miller Jan 12, 2012. 3 Replies

Hi,  can the mods please move this if it's in the wrong section? Is it possible to load any code with APM planner? The only option I can see is loading the current code. I would like to load 2.0.55…Continue

 

Hans Miller's Page

Latest Activity

Hans Miller replied to Randy's discussion AC-3.1 autotune support discussion
"Hi there, I have a success to report. Maidened my mapping quad today (680mm, CF frame, 3509 380kv motors running on 6s 4-8ah, 15x5 CF Props). Went straight onto autotune after checking out basic controls. Autotune ran fine, although I think I made…"
Jul 18
Hans Miller commented on Hugues's blog post PIXHAWK powering critical attention points - Wiki complementary information
"It would be nice if someone could clarify who is right here. Otherwise some of us may start panicking. Also what of ground loops o…"
Jun 16
Hans Miller replied to Tom McKinnon's discussion Acceptable level of noise on the servo +5V rail? in the group ArduPlane User Group
"Never mind, I wrote before thinking. Sorry."
Jun 10
Hans Miller replied to Tom McKinnon's discussion Acceptable level of noise on the servo +5V rail? in the group ArduPlane User Group
"The manual specifies a diode across the pins..."
Jun 10
Hans Miller replied to Owais Bukhari's discussion one rotor failure in quadrotor in the group ArduPlane User Group
"No. Not possible."
Jun 4
Hans Miller replied to Jeremy Tay's discussion Xbee as telemetry kit for pixhawk
"No. Hence the need for custom firmware."
Jun 2
Hans Miller replied to Jeremy Tay's discussion Xbee as telemetry kit for pixhawk
"Nothing easy. Probably best to use 3dr radios with custom firmware."
Jun 2
Hans Miller replied to Jeremy Tay's discussion Xbee as telemetry kit for pixhawk
"Why would you want to? Xbees are junk."
Jun 2
Hans Miller replied to Pierre Gibouin's discussion 3DRobotics temporarily stops shipments outside of US and Canada
"Paul, don't blame the babies. Blame the parents."
Jun 1
Hans Miller commented on Austin H's blog post Think Fast - Feature event based neuromorphic sensors
"That was four years ago. I wonder how far they are now."
May 31
Hans Miller replied to Pierre Gibouin's discussion 3DRobotics temporarily stops shipments outside of US and Canada
"bylo by fajn tuhle otazku smazat, nez jim dojde, ze to tak delaj vsichni. jo jde to. "
May 30
Hans Miller commented on Robert Krogh (hooks)'s blog post Huge Mugin 4450 UAV platform
"Nice flaps... who needs cooling air to the engine, when they're down, a?"
May 14
Hans Miller replied to Pierre Gibouin's discussion 3DRobotics temporarily stops shipments outside of US and Canada
"I'm going to GUESS that the US State Department put the kybosh on 3dr exporting."
May 10
Hans Miller replied to Pierre Gibouin's discussion 3DRobotics temporarily stops its shipments to the world except US and Canada
"Wow, that's a new low."
May 10
Emad Amm commented on Hans Miller's blog post Useful tips for log analysis
"So the values of MOT are percentage not currents, voltages nor the motors pulse width modulation that the ESC's receive from APM"
May 5

Developer
Michael Oborne commented on Hans Miller's blog post Useful tips for log analysis
"mot = motor. values are generaly close to 2000 for full throttle and 1000 for no throttle"
May 5

Profile Information

About Me:
...
Please tell us a bit about your UAV interest
...

Hans Miller's Blog

Useful tips for log analysis

Posted on March 7, 2012 at 4:30pm 13 Comments

Hi all, I thought I'd do a little write up on how I tend to use the log analysis function of APMPlanner.

I don't claim to be very knowledgeable about coding and such, being more of a engineering type I tend to use the graphs to understand what the software is doing, rather then trying to understand by reading the…

Continue

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

© 2014   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service