Flying laps at home with one tough little tricopter. Hit the house, trimmed some trees, prentended to be an axe. This little guy does it all.
DIY T-Copter Frame and yaw mech by me using 5/8in square hardwood.…
In the last video of fails I kept having a problem dropping into the ground after cutting back the throttle. I just couldn't get enough lift to recover so I'd slam into the ground after ducking a tree.
So I had a few beat up 11x4.7 props on the wall and got the bright idea to give them a try. They are all regular rotation props so it drifts a bit and has a tiny…Continue
Some random clips from the past few weeks. My first attempt at a backflip failed miserably. Not sure if I need to change something in the APM settings. I had it in acro but when I pulled back and cut the throttle in wouldn't go past vertical. I'm taking suggestions. Then flying and crashing around the house using the new stubby tricopter. This thing is by far my…
The coffin copter was all good. Passed it's float test and was ready for some real world action. I noticed that one of my motors was louder than the others. My initial diagnoses was bad bearings. So I purchased a batch of bearings. BTW bearing size for this motor is 10 x 4 x 10. But that didn't fix the noise. So I was left scratching my head. I…Continue