James tate
  • Male
  • Indianapolis, IN
  • United States
Share

James tate's Groups

James tate's Discussions

Getting Firmware version in Qgroundcontrol

Started this discussion. Last reply by Rejean Boucher Mar 12, 2016. 1 Reply

Using Qgroundcontrol-2.9.4-72, how do you find the Firmware Version of the aircraft you are running ??Continue

Are there any programming of Pixhawk to use ADS-B Transponders.

Started this discussion. Last reply by Darius Jack Jan 22, 2016. 1 Reply

The FAA is gradually going to push this onto the UAV's. there is a mention of around 2020Continue

Using A 6S battery with a 180A Attopilot on Pixhawk

Started this discussion. Last reply by James tate Jan 21, 2016. 4 Replies

I have a 180A Attopilot on my 680 hexicopter can I run 6S batteries on it ?Continue

Totally Disgusted with 3DR

Started this discussion. Last reply by Justin Mar 28, 2016. 2 Replies

I damaged the red pushbutton switch on my Pixhawk build today.I called 3DR to order a new one, and I learned that they don't sell the switch any more, unless you buy a complete Pixhawk kit to get a…Continue

 

James tate's Page

Profile Information

About Me:
I'm into building a new Tarot 680 Pro Frame
Please tell us a bit about your UAV interest
I enjoy flying Multicopters and new to the sport.
Hometown:
Indianapolis,Indiana

Comment Wall (5 comments)

At 7:29pm on March 28, 2015, mark sahf said…

I got an email but cant find the post that you were looking for a 4s 20,000mah battery. We were just discussing that and the tenergy 16000mah battery. the 16,000 tenergy has been tried on the x8 and works quite well. the link below is for a 20,000mah battery but there is a question regarding the weight as two different numbers are given and both are high. The tenergy can be bought at hobbyking the cheapest as of last discussion and its a good brand it does come with a xt90 connector so you would have to get the adapter or solder a xt60 on it. I have 2 of them and they work great. I think 3DR sells them with the xt60 on it or someone said they did. Hope this helps. any questions send a note.

http://www.alibaba.com/product-detail/shenzhen-rechargeable-14-8v-20000mah-lipo_60035933411.html

Happy flying,

Mark

At 3:37pm on April 3, 2015, William Cox said…
James here is one close to what you are looking for
http://www.maxamps.com/Lipo-22000-148-Pack.htm

Good luck

Will
At 4:00pm on April 3, 2015, Keith Rolston said…
There is an outfit call Quadrocopter.ca
Not to be con fused with Quadrocopter.com. They sell 4s 20,000mah made by AGA Power. Reasonably priced too. They are in Montreal. Best of luck with your search.
At 8:15pm on April 21, 2015, Bob said…

Just go to the function menu on the T8FG and program RD or LD (your choice) dial to Ch8. The open Mission Planner, initial configuration, flight modes. If you had calibrated the radio, you should see the PWM change as you rotate the dial. Then select the dialog box for the function you want. When I dial LD full counterclockwise, it is in Manual, then it goes to FBWA, FBWB, then RTL when full clockwise. You can choose which mode you want as you move the dial. 

At 6:55am on April 22, 2015, James tate said…

Thanks very much, if I have any problems I'll contact you.

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service