Luis Gil
  • Male
  • Spain
Share

Luis Gil's Groups

 

Luis Gil's Page

Latest Activity

Artūrs replied to Luis Gil's discussion DJI Inspire2 not accepting auto mode in the group UgCS
"Quote from another of our users: Maybe this helps Artūrs"
Jul 5
Luis Gil replied to Luis Gil's discussion DJI Inspire2 not accepting auto mode in the group UgCS
"Unfortunately not. I already tried that on july 2nd with no success: deleted and reinstalled DJI Go app, even deleted and reinstalled UgCS app. The only way to avoid restrictions was manually fly with DJI app."
Jul 4
Artūrs replied to Luis Gil's discussion DJI Inspire2 not accepting auto mode in the group UgCS
"Luis, one of our customer writes on Facebook that this helped him: I hope this helps you too. Arturs"
Jul 4
Luis Gil replied to Douglas Stern's discussion Photogrammetry with A2 flight controller, Z15 gimbal in the group UgCS
"Yes Douglas, it works like charm. Our equipment: DJI S900, A2 controller, Zenmuse GH4, 2.4 GHz datalink, and (of course) UgCS. Our microsite (sorry, only Spanish by now): http://modelos.aerosar.es"
Jul 4
Luis Gil replied to Luis Gil's discussion DJI Inspire2 not accepting auto mode in the group UgCS
"Thanks so much Artürs, looking forward to your changes. Keep doing a good job !"
Jul 4
Artūrs replied to Luis Gil's discussion DJI Inspire2 not accepting auto mode in the group UgCS
"Dear Luis,DJI announced that starting from July 1 all DJI drone users are required to Login into their DJI accounts. Without registration the flight of  DJI drones will be limited to a 50-meter (164-foot) radius up to 30 meters (98 feet) high.…"
Jul 4
Luis Gil replied to Douglas Stern's discussion Photogrammetry with A2 flight controller, Z15 gimbal in the group UgCS
"I'm using  the same confiiguration (except the Z15-GH4). Find the "shut" cable in the gimbal contoller, it should go to he RC receiver (Futaba in my case). Unplug it from the receiver and plug at F2 port on the A2. This way UgCS…"
Jul 3
Luis Gil added a discussion to the group UgCS
Thumbnail

DJI Inspire2 not accepting auto mode

Hi all. I'm having trouble with an Inspire2 photogrametric mission. When I try to start (auto mode) it shows the following message: Auto mode failed - the radius of mission is over the acceptable limit. If I takeoff in manual mode, I see I cant go further than about 30m height and 50m distance. I've checked all parameters, all fine. Flying with DJI Go it flies without problem (no restrictions set up). Why can't I fly with UgCS? Maybe is it a DJI firmware issue?Thanks in advance. Luis.See More
Jul 3
Anton Senkovskiy replied to Luis Gil's discussion Circle tool in the group UgCS
"Yes, you're right but you don't need to select first point to start at step #2. Just Upload & switch to Auto."
Mar 21
Luis Gil replied to Luis Gil's discussion Circle tool in the group UgCS
"Thanks Anton, I'll give a try to multiple part missions. Let me know if I'm right with the following: Design a circular route with circle tool, 100 approximating points (waypoints). Set start point to #1, upload route to A2 (50…"
Mar 20
Anton Senkovskiy replied to Luis Gil's discussion Circle tool in the group UgCS
"Hi Luis! No, it will produce the same amount of points to fly around your circle. I can suggest you: 1. Use "number of approximating points" option to adjust number of points in circle 2. Use our feature to divide mission to parts. You…"
Mar 20
Luis Gil added a discussion to the group UgCS
Thumbnail

Circle tool

Hi all.I've been using UgCS circle tool with action execution at every point. It works pretty fine, but I have a great waypoint limitation (DJI A2 controller). So I want to try something different: fly a circle at low speed and let the camera shoot by time repeatedly.Só the question is: if I set action execution at start and select camera by time (say 2 sec. for example), will it shoot all the circle or do I have to set the total number of shoots?Thanks.   Luis.See More
Mar 17

Profile Information

Please tell us a bit about your UAV interest
Still picture, video, photogrametry, aerial survey and detection
Hometown:
Lugo

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service