"@Murray I think Dave means the right project. The ATMOS team did a lot of flying in high winds as they are in the Netherlands they have plenty of that. :) They may have a video showing off their high wind performance.
I only have a video of the…"
Piotr Esden-Tempski's Discussions
PPM Encoder Version 2 Eagle files
Started this discussion. Last reply by Craig Elder Aug 10, 2012. 3 Replies 0 Likes
Hi, I am looking for the Eagle files of the Version 2 PPM encoder. The ones posted on the product page seem to be an older version without the oscillator. Any chance of getting hold of the updated…Continue
Piotr Esden-Tempski's Page
Latest Activity
Piotr Esden-Tempski commented on Chris Anderson's blog post ATMOS, a VTOL plane with autonomous transitioning from vertical to horizontalPiotr Esden-Tempski commented on Chris Anderson's blog post ATMOS, a VTOL plane with autonomous transitioning from vertical to horizontal"@arashi not exactly they developed their controller at the end separately as they were going for full autonomity and less the funflying side of things as the Quadshot. They are actually flying fully autonomous. The whole mission on UAVForge they did…"
Piotr Esden-Tempski commented on Chris Anderson's blog post ATMOS, a VTOL plane with autonomous transitioning from vertical to horizontal"We sponsored ATMOS with an early prototype of the Quadshot. They based their design on it and optimised it for the requirements of the competition. It is also based on Paparazzi as Quadshot is."
Piotr Esden-Tempski commented on Chris Anderson's blog post New Open Source brushless motor controller"Yes it stalled for a bit. But I am working on it slowly since about a month again in my "spare" time. :) There should be something new to report in not too far future."
3D RoboticsCraig Elder replied to Piotr Esden-Tempski's discussion PPM Encoder Version 2 Eagle files
"The eagle schematic and pcb files in the listing are correct for the board that ships from 3dr.
The 3dr variant uses the Paparazzi firmware so the functionality of the 3dr board is identical to the Paparazzi board but the wiring and layout shown in…"
Piotr Esden-Tempski commented on naish88's blog post my first UAV in 2008 (2)"It is really sweet setup. It is great to see that you are running paparazzi GCS on it!
Which autopilot are you using? TWOG or Tiny?
If possible could you provide some info about your airborne camera and gimbal setup?
Cheers Esden"
KM6VV replied to Piotr Esden-Tempski's discussion PPM Encoder Version 2 Eagle files"this isn't very encouraging!
I just bought the V2 PPM encoder, and the files and manual for it are wrong!
Anyone know where the correct documents are?
Alan
"
Piotr Esden-Tempski commented on Max Levine's blog post More about Quadshot, on Hak5."Why not getting the Latte, you will exactly get what you are asking for, just the airframe..."
Piotr Esden-Tempski replied to Piotr Esden-Tempski's discussion PPM Encoder Version 2 Eagle files"As I am not getting an answer here, I seem to have to work based on the files that are provided. You can find all the hardware and software changes here: https://github.com/esden/ppm_to_spektrum_encoder
Still work in progress... :)"
Piotr Esden-Tempski posted a discussionPPM Encoder Version 2 Eagle files
Hi, I am looking for the Eagle files of the Version 2 PPM encoder. The ones posted on the product page seem to be an older version without the oscillator. Any chance of getting hold of the updated files?See More
Piotr Esden-Tempski commented on Chris Anderson's blog post Another Kickstarter project: Quadshot, a Paparazzi-powered acrobatic RC craft"Well, you can mount an actuated gimble. We did that and it works really well. As transition is automatic you don't get confused."
Piotr Esden-Tempski commented on geir's blog post 454 mhz chumbyhackerboard"You can also take a look at paparazzi and Lisa/L.
http://paparazzi.enac.fr/wiki/Lisa
You have an option of mounting a gumstix on it. But you can also run the full rotorcraft firmware on the stm32 on Lisa/L."
Piotr Esden-Tempski commented on Chris Anderson's blog post New Open Source brushless motor controller"Hi! I just found this post. o_O Just to streighten things out, we are not switching to Atmega, that would be a step back not forward. The reason for Cortex-M3 are better control algorithms then trapezoidal used currently in all motor controllers…"
Profile Information
- Tell us a bit about your UAV interest
- www.esden.net
- Hometown:
- Warsaw
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
ArduRover User Group
185 members
-
Turkish Ardu Group
6 members
-
Agricultural UAVs
129 members
-
ArduCopter Italian Group
87 members
-
Moderators
24 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
