Search Results (20)

3D-printable gimbal for RaspberryPi camera

I ordered …

Continue

Added by JeanLeFlambeur on August 29, 2016 at 2:30pm — 7 Comments

Design of a 3-Axis Gimbal for Land Use

There was a joke that one could take the gimbal from a quadcopter, flip upside-down, put it on a handle, and it becomes a handheld gimbal for use on land. It was an intriguing idea. I would like to share our interesting experience in the design process.

 

Popular Gimbal…

Continue

Added by Rick Hwang on February 12, 2016 at 11:22am — 2 Comments

Part 2 Feiyu Tech gimbal / SOLO

Once connected, navigate to the Standard Parameter's screen, scroll down and change the CH6_FUNCTION from Disabled to RCPassThru. This opens the connection for the tilt function via the paddle. Once changed click Write Params at the top.

Once Written then…

Continue

Added by Todd Harper on August 9, 2015 at 12:30pm — 3 Comments

RC Airship as Drone

We've been developing this RC airship over the past two years. Features include 1 hr Endurance, 3-5 amp battery, 400g payload, camera gimbal, FPV, Low vibration, crash survivable, Helium recovery

and storage after each day of use.

Some videos:



Welcome to the LED - Long Endurance Drone…

Continue

Added by Martin Hill on March 30, 2016 at 6:00am — 22 Comments

Universal Adapter for DJI Drone Cameras - Now supporting DJI Zenmuse XT infrared camera



Some of you might remember our previous post about the universal adapter for DJI gimbals we have developed: …

Continue

Added by Kristaps Brass on April 4, 2017 at 2:57am — No Comments

Installing a Feiyu Tech MINI 3D gimbal on the 3DR SOLO Part 1 of 2

This is how I went about installing a Feiyu-Tech MINI 3D Gimbal to my SOLO.

I would like to strongly emphasize that this modification will void your 3DR SOLO warranty completely and entirely. If you are not comfortable with the voiding of said warranty please do not…

Continue

Added by Todd Harper on August 9, 2015 at 12:23pm — 3 Comments

Universal Adapter for DJI Gimbals

We would like to share with you a project we've been working on at SPH Engineering. We have developed an adapter that makes it possible to connect and use DJI gimbals / camera systems with virtually any other drone or autopilot.

It was designed as a part of our tethered drone system AirMast…

Continue

Added by Kristaps Brass on March 4, 2017 at 2:30pm — 16 Comments

Around the Flying Site

Video taken from a TBS Style Quad using a GoPro Hero 3 Silver the camera is mounted on the frame with small vibration mounts and no gimbal.

This is the area surrounding our club flying site near Broughshane, Northern Ireland

David Ardis

Added by David Ardis on June 22, 2014 at 3:00am — 3 Comments

Easy Aerial thermal camera in action - most affordable heat sensor for drones

Hi guys,

check out our thermal camera on one of the custom endurance builds.

We were able to improve the video quality significantly and it looks very smooth with gimbal stabilization.

It it able to show warm bodies on the ground from few hundred feet up. 



We are selling this complete thermal kit…

Continue

Added by Ivan Stamatovski on December 30, 2016 at 7:31pm — 5 Comments

GimBALL - 3D printed DIY Gimbal with closed hull - PART1 (design)

Hi guys, 

let me introduce my latest project, a 3D printed gimbal for MobiusHD camera. I call it GimBALL regarding of it's shape...

My goal was to make a closed, aerodynamic shaped gimbal, which can be used in the front of a plane (ie. X-UAV Talon), up to 100 km/h airspeed. So I tried to make thisthing  as…

Continue

Added by Adrián Nagy Hinst on November 24, 2014 at 11:09am — 37 Comments

Shock Absorber

Due to my poor Flying skills, I had to search for a way to reduce the damage due to hard landing. This is what I come up with and it works well. However at times it is too bouncy.

I also face a problem with the …

Continue

Added by Sandesh Dhagle on July 16, 2012 at 12:03pm — 3 Comments

Autonomous Take-off and Landing on a Moving Carrier

This video shows the demonstration of a variable-pitch quadrotor autonomous takes off and lands (ATOL) on a moving carrier.

The system architecture is a carrier based vision system.

It use visual positioning result to eliminate the GPS bias between UAV and carrier, thus it can provide continuous and accurate positioning result for ATOL…

Continue

Added by Zergtim on February 5, 2017 at 8:30pm — 9 Comments

Looking for challenge

Hi,

after finishing my last project, I'm ready for the next challenge.

However,  right now I can't afford to start another project and buy components for development, although I'd have ideas of course.

So I'd like to offer my experiences in 3D modelling, printing and basic programming skills for some…

Continue

Added by Adrián Nagy Hinst on April 23, 2017 at 11:01pm — 3 Comments

GimBALL - 3D printed DIY Gimbal with closed hull - PART2.5 (integrating) + STL files!!!

Hi,

I continue my blog with the integration of GimBALL into the nose of an X-UAV Talon.

Because of complexity and available space in the Talon's nose, I decided to build it with 2-axis stabilized setup.

I hope I'll be able to test it in the air soon, and will share some test videos. Till then, here…

Continue

Added by Adrián Nagy Hinst on January 1, 2015 at 11:03pm — 21 Comments

Post 2. MAAXX-Europe. The Groundhog Hardware

The Groundhog was at least twice as big and probably three time as heavy as many other competitors.  Why?  Because it is built for endurance (flight time 35mins+) and also because it's what I have as my development platform.  It normally flies outdoors of course...

Ah, so that means no…

Continue

Added by Mike Isted on March 2, 2017 at 3:34pm — 3 Comments

Drone color tracking

This is about some experiments I’m doing using python and openCV and of course one of my drones… In this case the drone used for taking the videos, was my hexacopter (Alduxhexa).

The point is to explore different techniques and algorithms to track colours, objects and the…

Continue

Added by Aldo Vargas on March 17, 2015 at 11:50am — 8 Comments

3DR Pixhawk- powered DJI S1000



For the past several months we have been working closely with an infrastructure inspection firm to develop a multirotor system for them.  There were…

Continue

Added by matt.koestner on May 20, 2015 at 9:27am — 33 Comments

Part 2: How to build a High-Definition FPV UAV using a Rasperry PI with HD camera, using a high speed WiFi link

Part Two: Here is the original picture of the finished product:

This is the second part of a 2-part series on 'How to build a High-Definition FPV UAV using a Raspberry PI with HD camera, using a high speed WiFi link.

In my first post on the subject (located …

Continue

Added by Patrick Duffy on September 29, 2014 at 12:00pm — 765 Comments

FlytOS now supports Intel Edison!



While there has been a lot of interest in use of Intel Edison on drones, it has been quite challenging to get this tiny board configured for any practical use. FlytOS now brings the power of advanced drone applications to the Intel Edison platform. With FlytOS, you can make use of your…

Continue

Added by Nitin Gupta on February 10, 2017 at 11:47am — 1 Comment

Synthetic camera offers FPV purely as a software solution

This is my second post in the series called "FlightZoomer 3 Innovation Previews". The first was this one: Maximized terrain awareness for drone pilots

The innovation highlight presented in the video…

Continue

Added by Martin Rüedi on March 23, 2017 at 2:38pm — 15 Comments

Monthly Archives

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

1999

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service