Adrián Nagy Hinst's Blog (24)

Looking for challenge

Hi,

after finishing my last project, I'm ready for the next challenge.

However,  right now I can't afford to start another project and buy components for development, although I'd have ideas of course.

So I'd like to offer my experiences in 3D modelling, printing and basic programming skills for some…

Continue

Added by Adrián Nagy Hinst on April 23, 2017 at 11:01pm — 3 Comments

3D printed FPV racer - 170 mm size - Rev7 - More improvements

Hi, since my last blog entry I made some more changes on my design. 

Key features:

  • Video TX antenna is positioned at the end of the main body to improve signal strength during fast…
Continue

Added by Adrián Nagy Hinst on January 24, 2017 at 11:50pm — 1 Comment

3D printed tray for Graupner MZ-24

Hi again, this is my custom designed tray for my Graupner MZ-24. My goal was to build a small tray that can be removed easy without any tools and small enough to be put next to my transmitter in my bag. I think I succeed... :)

Suggested print settings:

  • 0,2 mm layer height
  • 3 layers all…
Continue

Added by Adrián Nagy Hinst on January 11, 2017 at 11:51am — 1 Comment

3D printed FPV racer - 170 mm size - Rev5 - Final Design

Hi guys, let me introduce the final version of my 3D printed FPV racer. Since the last blog entry I made some further small modifications according to my experiences. All files can be downloaded…

Continue

Added by Adrián Nagy Hinst on January 6, 2017 at 9:35am — No Comments

3D printed FPV NIGHT racer - 170 mm size



Hi! After my successful first…

Continue

Added by Adrián Nagy Hinst on December 29, 2016 at 12:29am — 2 Comments

3D printed FPV racer - 170 mm size - Rev3 - Ready to take off!

Hi all.

Finally I received all parts so I assembled the first prototype of my 170 mm FPV racer design (see previous posts for details and STL files).

All-up weight excluding battery and micro GPS is finally 286g.

And HOTT telemetry totally works!!! :)…



Continue

Added by Adrián Nagy Hinst on November 21, 2016 at 6:33am — 11 Comments

3D printed FPV racer - 170 mm size - Rev3 - UPDATE

Hi, 

after uploading my initial design, I got several feedbacks. So I tried some configurations, and finally came up with this Rev3 design. The major difference is that the video TX antenna is between camera and…

Continue

Added by Adrián Nagy Hinst on October 20, 2016 at 8:00am — 7 Comments

3D printed FPV racer - 170 mm size

Hi, I'd like to share my latest design. After successfully finished my printer, wanted to design something fun and useful so decided on building an FPV racer which is quite popular nowadays.

Basically I was inspired by the Jellybean X nano…

Continue

Added by Adrián Nagy Hinst on October 15, 2016 at 11:00am — 9 Comments

300-sized 3D printed quadrocopter for FPV

Hi, let me introduce my latest plan, a 300-sized FPV quadrocopter. My goal was to design a small 3D printed quadrocopter that can be printed on any cheaper DIY 3D printer. Additionally I wanted to simplify wiring and maintenance. So I decided to make a modular design. The hard-cased…

Continue

Added by Adrián Nagy Hinst on March 27, 2015 at 7:01am — No Comments

APM Mode switch with LCD display

Hi, let me introduce my APM mode switch with LCD display.

The basic idea is from Stefan Gofferje's project, thanks on him for PPM stream code part!!!

My idea was to make something more good-looking thing for…

Continue

Added by Adrián Nagy Hinst on March 8, 2015 at 12:00am — 20 Comments

X-UAV Talon UPGRADES - PART2

Hi, this is an addition to my prevous blog post.

I consider the rear wing spar a bit "weak" especially when using the wing extenders too. So I modified the wooden parts, I cut off the rear upper parts and replaced by…

Continue

Added by Adrián Nagy Hinst on January 6, 2015 at 12:32am — 1 Comment

X-UAV Talon UPGRADES

Hi, today I decided to share all my upgrades I designed and built for my Talon.

Since attachable picture number is limited here, detailed photos and more renderings can be fount on the project GrabCAD page, together…

Continue

Added by Adrián Nagy Hinst on January 3, 2015 at 1:28am — 19 Comments

GimBALL - 3D printed DIY Gimbal with closed hull - PART2.5 (integrating) + STL files!!!

Hi,

I continue my blog with the integration of GimBALL into the nose of an X-UAV Talon.

Because of complexity and available space in the Talon's nose, I decided to build it with 2-axis stabilized setup.

I hope I'll be able to test it in the air soon, and will share some test videos. Till then, here…

Continue

Added by Adrián Nagy Hinst on January 1, 2015 at 11:03pm — 21 Comments

GimBALL - 3D printed DIY Gimbal with closed hull - PART2 (assembly)

Hi again,

Hereby I'd like to continue my project. As I said earlier, all parts were printed using a Stratasys 3D printer, which uses FDM technology and support material too.…

Continue

Added by Adrián Nagy Hinst on November 25, 2014 at 11:29am — 22 Comments

GimBALL - 3D printed DIY Gimbal with closed hull - PART1 (design)

Hi guys, 

let me introduce my latest project, a 3D printed gimbal for MobiusHD camera. I call it GimBALL regarding of it's shape...

My goal was to make a closed, aerodynamic shaped gimbal, which can be used in the front of a plane (ie. X-UAV Talon), up to 100 km/h airspeed. So I tried to make thisthing  as…

Continue

Added by Adrián Nagy Hinst on November 24, 2014 at 11:09am — 37 Comments

Portable ground station - upgraded with antenna tracker

Hi,

i'd like to share my latest development, this is for testing further AntennaTracker code developments.

The current part is an upgrade to my Portable…

Continue

Added by Adrián Nagy Hinst on September 25, 2014 at 7:34am — 6 Comments

ArduPilot AntennaTracker code - initial testing

 

Hi,

some days ago a new…

Continue

Added by Adrián Nagy Hinst on August 17, 2014 at 12:30am — 24 Comments

EasyWing FPV flying wing

Hi, let me introduce my new FPV flying wing, the modded EasyWing.

The original EasyWing was designed by JAN-CHE in Hungary (link to JCP webshop), also he has been cutted all the EPP parts for me. Many thanks on his support!!!

So…

Continue

Added by Adrián Nagy Hinst on August 3, 2014 at 11:00am — 5 Comments

First 480 size heli drone designed for FPV and aerial purposes - Indiegogo started!!!

- UPDATE -

After some minor updates and changes, I started my Indiegogo campaign.

Regards, Adrian

- UPDATE -

Hi, it's me again from Hungary. Let me show my next design, a 480 sizde heli built for FPV and aerial…

Continue

Added by Adrián Nagy Hinst on July 31, 2014 at 12:30pm — 7 Comments

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service