For those I mailed to by mistake, I apologize.
As with Horia, I too am unable to get and communication between my computer (pc or mac) and my ArduPilotMaga. I appears that during my first efforts I was able to load ArduPilot Mega 2.2.0(as you can see below). I loaded the firmware with Planner, when all the activity stopped the display read successful. since then I have not been able to communicate. Below are the specifics. When attempting to reload the firmware the transmit indicator flashes. It appears to be working, just not talking. Can anyone give me any other directions?
TIA
Bought as parts and self assembled
ArduPilot Mega (ArduinoMega Atmega1280) and ArduPilot Mega IMU Shield
ArduPilot Mega IMU Shield Led indicators
Power > Blue
C > Intermittent (at times, full on)
ArduPilot Mega - Arduino Compatible UAV Controller w/ ATMega1280 Led indicators
Power >On when powered
MUX >Full On
PPM >Normally full on, Sometimes Flashing.
I've read the indicator meanings.
Arduino 0022
_____________________
Init ArduPilotMega 2.2.0
Free RAM: 2369
load_all took
>then nothing<
_____________________
APMPlanner 1.0.22 Build 1.0.4199.27187
_____________________
Opened com port.
Init ArduPilotMega 2.2.0
<sometimes>
Free RAM: 2369
load_all took
<then nothing>
Replies
Have you done a CLI setup? (or setup via the Mission Planner)
Go to the CLI Setup menu and type reset. Then go through the radio setup again.