Discussions

3DR 915 multipoint with SiK 2.x?

Posted by Brit Davis on January 16, 2014 at 7:05am

Hello,

Is it possible to use the new 3DR 915 telemetry set, with SiK 2.x firmware, to allow two ground stations? For instance MP on PC and DroidPlanner on Android.

Thoughts?

Brit

You need to be a member of diydrones to add comments!

Join diydrones

3dr, mp, sik, android, multipoint, telemetry

Email me when people reply –

Replies

Mohamed Abdelkader Zahana June 19, 2018 at 7:17am

Hi. How can I compile the multi point SiK for 3DR 433 MHz modules?

Thanks.

Jake Stew said:

Here is the link to the firmware source...

https://github.com/RFDesign/SiK/tree/SiK_Multipoint

3DR 915 multipoint with SiK 2.x?

Hello, Is it possible to use the new 3DR 915 telemetry set, with SiK 2.x firmware, to allow two ground stations? For instance MP on PC and DroidPlann…
Jake Stew January 6, 2016 at 12:01pm

Here is the link to the firmware source...

https://github.com/RFDesign/SiK/tree/SiK_Multipoint

RFDesign/SiK

Tools and firmware for the Si1000 - Si102x/3x. Contribute to RFDesign/SiK development by creating an account on GitHub.
Francis German May 15, 2015 at 12:51pm

Hi Brit,

This version seems to work with my 3dr-Telemetry Modules V1.0 on 433MHz.

Only the android Software (Droidplaner, Droidplaner 2) seem to have problems if the PC is connected in parallel.

It switches quickly between connected and not connected but it can control the copter.

Do you happen to have a later (maybe further optimized) firmware version than v2.4?

Thanks in advance
Brit Davis August 18, 2014 at 8:37am

Here's the firmware, everybody :)

MPSik V2.4 radio~rfd900a.ihx.zip
- Bruno Rovagnati > Brit Davis November 24, 2014 at 10:35am
  
  hi, i tried your 2.4 and the RFD 900 is not responding any more... not even the bootloader. Green light is alway on as if its connected to an other modem (and is not)
  
  any clue?
  - Brit Davis > Bruno Rovagnati November 24, 2014 at 10:45am
    
    Bruno,
    
    Sorry you're having issues! That firmware is not mine, it comes directly from RFD. It worked for me, but it's been so long since I messed with it that I don't think I know any more than you do about how to recover or re-flash.
    - Bruno Rovagnati > Brit Davis November 24, 2014 at 11:01am
      
      tried with 3rdradio config and RFDtools to reflash, but no luck.
      
      any tip on any "low level" flash tool for this modem?
      - Marcin Krawczyk > Bruno Rovagnati November 24, 2014 at 11:04am
        
        I'm not sure, if this will work:
        
        https://code.google.com/p/ardupilot-mega/wiki/3DRadio#Forcing_bootl...
        
        Bruno Rovagnati > Marcin Krawczyk November 24, 2014 at 11:32am
        
        thx man! worked perfectly
- Adrián Nagy Hinst > Brit Davis August 18, 2014 at 9:00am
  
  Many thanks!
  
  Does it good for HM-TP module too?
  
  Or can you share the right for those too?