Posted by Brian Boyle on December 10, 2011 at 2:27pm
Hey folks.Can I ask a question about this frame. I just got mine and I am wondering if perhaps I am missing some parts. Does the kit not come with mounting screws for the APM?Unfortunitly the local Lowes does not have any M3 screws with nuts so I have to do something else. I would like to use screws as aposed to the double sided tape to ensure the main board is parallel to the frame and I feel this would be best accomplished by mounting with screws rather then the double sided tape.Cheers folks.Brian.
You need to be a member of diydrones to add comments!
I double check all the parts so no you are not missing any bolts... :)
The best way I am mounting the APM is with double side 3M tape... the thick one.. not only it is quite secure but it also remove a bit of the vibration.
You know what, all next kit I ship will now include a strip of double sided tape!
Replies
Hi Brian!
I double check all the parts so no you are not missing any bolts... :)
The best way I am mounting the APM is with double side 3M tape... the thick one.. not only it is quite secure but it also remove a bit of the vibration.
You know what, all next kit I ship will now include a strip of double sided tape!
now the fun part... make it fly!
Dany
www.canadadrones.com
Most people use thick foam tape with nuts and bolts relatively loosely attached just to keep it from moving, as you suggest. Any small bolts will do..