3DR Iris vs Phantom 2 Vision

Hi guys,

I am a hobbyist looking to buy my first UAV. Ultimately I hope to make some money by offering services using the UAV, possibly something in real estate. I was set to buy the Iris but then I saw the Phantom 2 Vision has a 25 minute flight time. Now I am researching which of the two is better suited for me.

1. In reality does the Vision really get 25 minute flight time?

2. Which one has the better software?

3. Which one has better community and customer support?

I will use the unit in Indonesia just FYI.

Thanks a lot

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • The biggest drawback with the Vision/Vision+ is the built-in wifi downlink. Range is poor and you have to view everything on a smart phone. I always point people towards using a GoPro with monitor and video downlink. The Iris+ has a larger 'wingspan' and the arms sit back towards the body, so you don't have to deal with props dipping into the shot which is common with Phantoms.

    The biggest advantage of the IRIS+ is the customer support from 3DR. I have flown both quite a bit and prefer the IRIS+.

    • I share some of the same points that others have made. It comes down to what you need and how you want to grow with it.

      All my flying/operating is centered around photography/videography. Having owned a Phantom, then a custom 450 and now an IRIS+ I can say the IRIS+ for me is the clear winner. Well made, ever advancing hardware & software and is backed by people who want to see just how far this technology can go.

      As for flight times. My 450 (with camera/gimbal) was getting close to 20min in the air but what I noticed is that I rarely flew for that long. I get my shots lined up, switch everything on and start filming. On average I was in the air 10-12min tops. So the battery issue, which really isnt much of an issue for me, is something you need to look hard at and ask yourself "how long do I really need to be in the air for?" 

      Lastly, customer support. In working with DJI in the past and now with 3DR I have never been more impressed with everyone who I have spoken with there. They answered all my questions, give helpful advise and in one situation went above and beyond what I was expecting to make sure I was taken care of. Truly top notch service.

  • I was looking at both of these too.  I have a custom built Flamewheel F450 that I tend to experiment with, but I wanted an "it just works" copter to take with me so I know I can just fly if my custom copter is giving me trouble.

    I looked at the IRIS, but DJI just nailed it on the Phantom 2 for flight time and ease of use.  I ordered one from DroneFly.com out of California because a friend of mine recommended them.  The are a DJI reseller.

    On the custom copters though, I'm using 3DR stuff.  I just received a Pixhawk, and I have their GPS module as well, and those are going onto on a Tarot frame.  My current F450 build is using APM 2.6 + GPS.  Giving 3DR enough time to sort it out, I think they will eventually surpass DJI in this market.  This stuff is really just taking off, and I think we will see some neat stuff over the next few years.

    Disclaimer:  I'm not affiliated with DroneFly....just passing the word on.

  • Does anyone know if the iris is able to pan and tilt its camera remotely like the phantom can? Can all phantoms do that? The vision can
  • Thanks guys for the reply. Yeah the Iris has a bit short flight time at up to 15 mins, probably less with more load. But i think that is the norm amongst other UAVs? One strange thing is Dji does not offer credit card pahment online only paypal and a chinese payment system. Also i want this machine in Indonesia but they dont deliver to my country strangely. Rather odd and a turn off.
  • I wonder how much flight time you get once you add a GoPro and gimbal. i will agree the bog standard motors that come from 3DR are underpowered and this is really evident when you add a small item like a GoPro the flight time goes way down as the motor throttle goes above 50%.

  • The Phantom Vision 2 flight time is real, and it's hard to beat. The system is light, and the components are well-matched.

    There is a good amount of Phantom community support (on other sites), but the Diydrones community is exceptional.

    The software question is a bit of a religious question, and what's "best" depends on your needs. Many more sophisticated features on the Iris side. There is a decent ground control station software available from DJI - for a price.

    3DR software and documentation has come a long way. The Iris, as a package, appears to aim for a simple user experience, as offered by DJI products. Without having experienced it personally, I can't say if it's there quite yet. I hope it is !

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @a1k0n: Did I get rid of hand-tuned parameters? Yes. Am I still hand-tuning more parameters? Also yes. I have a few knobs to address the…
Monday
DIY Robocars via Twitter
RT @a1k0n: I'm not going to spoil it, but (after charging the battery) this works way better than it has any right to. The car is now faste…
Monday
DIY Robocars via Twitter
RT @a1k0n: Decided to just see what happens if I run the sim-trained neural net on the car, with some safety rails around max throttle slew…
Monday
DIY Robocars via Twitter
Saturday
DIY Robocars via Twitter
RT @SmallpixelCar: @a1k0n @diyrobocars I learned from this. This is my speed profile. Looks like I am too conservative on the right side of…
Saturday
DIY Robocars via Twitter
RT @a1k0n: @SmallpixelCar @diyrobocars Dot color is speed; brighter is faster. Yeah, it has less room to explore in the tighter part, and t…
Saturday
DIY Robocars via Twitter
RT @a1k0n: I'm gonna try to do proper offline reinforcement learning for @diyrobocars and throw away all my manual parameter tuning for the…
Friday
DIY Robocars via Twitter
RT @circuitlaunch: DIY Robocars & Brazilian BBQ - Sat 10/1. Our track combines hairpin curves with an intersection for max danger. Take tha…
Sep 22
DIY Robocars via Twitter
RT @SmallpixelCar: Had an great test today on @RAMS_RC_Club track. However the car starts to drift at 40mph. Some experts recommended to ch…
Sep 11
DIY Robocars via Twitter
RT @gclue_akira: 世界最速 チームtamiyaのaiカー https://t.co/1Qq2zOeftG
Sep 10
DIY Robocars via Twitter
RT @DanielChiaJH: Always a good time working on my @diyrobocars car at @circuitlaunch. Still got some work to do if I’m to beat @a1k0n howe…
Sep 10
DIY Robocars via Twitter
RT @SmallpixelCar: My new speed profile for @RAMS_RC_Club track https://t.co/RtLb7TcgIJ
Sep 10
DIY Robocars via Twitter
RT @SmallpixelCar: Practiced at @RAMS_RC_Club today with my new @ARRMARC car https://t.co/AEu2hCx89T
Aug 28
DIY Robocars via Twitter
Aug 24
DIY Robocars via Twitter
RT @gclue_akira: 柏の葉で走行させてるjetracerの中身 #instantNeRF #jetracer https://t.co/giVvuE4hP7
Jul 4
DIY Robocars via Twitter
Cool web-based self-driving simulator. Click save when the AI does the right thing https://github.com/pncsoares/self-driving-car
Jul 4
More…