ALT Hold issue

good day gurus

ive set up a y6b with apm 2.6

flown it in stab mode

but when i switch it to alt hold is hear the motors are pulsating or oscilating but you cannot  see it, 

already done

thr_mid and it 350

thr_min 100

the two are set right now

now i havent touch the PIDs on altitude p, throtle p and throttle accell

im trying to understand whats written here http://diydrones.com/forum/topic/new?target=http%3A%2F%2Fdiydrones.com%2Fforum%2Fcategories%2Farducopter-2-x-multicopter%2FlistForCategory&categoryId=705844%3ACategory%3A362638

can some please explain.

tnx

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • i have solve the problem, reseting all parameters and re installing fw 3.2.1 was the solution

  • hi pat, tnx for the reply, i havent tried auto tune, it flies smoothly on stab mode, ive tried , checking what possible can cause the pulsating on the motor once i switch alt hold

    tried yesterday

    tune via ch 6 alt_p, ins_mpu filter set to 20,

    adjust thro_accel and rate

    i have played around with this even the refresh rate of esc, i have chek logs for vibration and seems okay according to what ive read,

    chek also for baro error but it seems ok

    it also pulsate even if props are remove, you can hear them.sounding like pumping
  • Have you tried the auto tune feature?

    https://www.youtube.com/watch?v=5pqdAOCkz00

    Also they are going to pulsate as they are trying to maintain altitude right.  If the wind blows then pressure is changing.  Do you have a case over your sensor on the chip?  Is there foam over it to reduce airflow?

This reply was deleted.

Activity

DIY Robocars via Twitter
Apr 27
DIY Robocars via Twitter
Apr 27
DIY Robocars via Twitter
RT @f1tenth: Sliding (autonomously) into the weekend like ... 🤖😎 #f1tenth #robots #AutonomousVehicles @OpenRoboticsOrg @NVIDIAEmbedded @Aut…
Apr 25
DIY Robocars via Twitter
RT @chr1sa: One of the problems with autonomous car racing is that watching software drive is not a very exciting spectator sport. To help…
Apr 25
DIY Robocars via Twitter
RT @SmallpixelCar: Replaced AGX Xavier with @NVIDIAEmbedded Jetson Xavier NX. Now both cars look fast and clean https://t.co/jlcoY2EjZf
Apr 25
DIY Robocars via Twitter
RT @chr1sa: Yesterday we had a record number of competitors (36) in our monthly @DIYRobocars virtual autonomous car race. We kept it going…
Apr 25
DIY Robocars via Twitter
Apr 16
DIY Drones via Twitter
RT @chr1sa: After more than a year of only virtual races, @DIYRobocars returns to the newly renovated @circuitlaunch on May 22 for the resu…
Apr 11
DIY Robocars via Twitter
RT @DAVGtech: And now available with LiDAR 🔥 https://twitter.com/Heavy02011/status/1381137016381964293
Apr 11
DIY Robocars via Twitter
RT @Heavy02011: #VirtualRaceLeague: @DIYRobocars Race #9 - #ParkingLotNerds #thunderhillracetrack, CA Join us for the next race April 24th,…
Apr 11
DIY Robocars via Twitter
RT @DWalmroth: Weather's finally cooperating, looking forward to racing 1:10 scale autonomous cars outdoors again! @diyrobocars, @NVIDIAEm…
Apr 7
DIY Robocars via Twitter
RT @AIDRI_: I finally succeeded in optimizing the trajectory and speed of a car on a #racetrack. Next step: implement a 2d controller and…
Apr 7
DIY Robocars via Twitter
@jetdillo @circuitlaunch Actually the second *in person* event in a year. We do virtual races every month
Apr 2
DIY Robocars via Twitter
Update: we're moving it back one day to Sunday (the 4th) at 11:00am instead
Apr 2
DIY Robocars via Twitter
@GrantEMoe @circuitlaunch Update: we're doing it on Sunday (4th) at 11:00am instead
Apr 2
DIY Robocars via Twitter
RT @chr1sa: Maybe we should have a mini @DIYRobocars race in our lower school's playground https://t.co/xLFeua1R6X
Mar 29
More…