Replies

          • 3702828641?profile=original

            • 3702871526?profile=original

          • 3702828814?profile=original3702828859?profile=original

          • I'm using opentx-taranis-lua-en.bin 2.0.12

  • I took a stab at the 7x7 icons from the Git repository. Problem is 7x7 is very small and it is very hard to differentiate the different states you are trying to represent, but here goes, I didn't name them by function because I didn't really know what would be more intuitive.

    3701833880?profile=original

    3701833995?profile=original

    3701833768?profile=original

    3701833886?profile=original

    3701834000?profile=original

    3701833773?profile=original

    All .bmp 4-bit and use all 7x7 space.

    • Thanks. I'll take a look at these as soon as possible. I think the message-log will look nice with some icons.

      • The images is pushed to my github. Unfortunately it seems like openTx has some kind of problem with them, or images that is 7x7 in general. I have to investigate a little.

        • We could make them 8x8 leaving the first column empty. I think I had the same issues with the arrows and changing them to 6x6 fixed it, but 6x6 is too small for these.

  • I have actually one issue on my Telemetry Screen and have no idea what to do.

    I have a 3d fix and on my Taranis i can see the correct Longitude but the Latitude is always 0°N 00' 0.0''

    Is that a known issue an how can i fix it ?

    Many thanks

    Christian

  • In the Arducopter_Position telem2.lua what are p0.bmp and t0.bmp supposed to look like? Also uarrow.bmp and darrow.bmp, wouldn't it be better to reuse arrow0.bmp and arrow8.bmp? And where is hud00.bmp?.

    I can get this script to display in the simulator but not on the PLUS. I renamed it telem3.lua and put it in the _modelname_ subdirectory under /SCRIPTS/ and all it shows is a blank screen.

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @donkey_car: Human-scale Donkey Car! Hope this makes it to a @diyrobocars race https://www.youtube.com/watch?v=ZMaf031U8jg
Jun 25
DIY Robocars via Twitter
Jun 25
DIY Robocars via Twitter
Jun 16
DIY Robocars via Twitter
RT @GrantEMoe: I won my first @diyrobocars @donkey_car virtual race! Many thanks to @chr1sa @EllerbachMaxime @tawnkramer and everyone who m…
Jun 13
DIY Robocars via Twitter
RT @gclue_akira: JetRacerで自動走行したコースを、InstantNeRFで再構築。データセットは別々に収集 #jetracer #instantNeRT https://t.co/T8zjg3MFyO
Jun 13
DIY Robocars via Twitter
RT @SmallpixelCar: SPC 3.0 Now the motor also works. This car is doable. I just need to design a deck to mount my compute and sensors. http…
Jun 13
DIY Robocars via Twitter
RT @SmallpixelCar: My new car SPC 3.0. https://t.co/CKtkZOxeNQ
Jun 7
DIY Robocars via Twitter
RT @SmallpixelCar: High speed at @diyrobocars thanks @EdwardM26321707 for sharing the video https://t.co/o4317Y2U1S
Jun 7
DIY Robocars via Twitter
RT @SmallpixelCar: Today at @RAMS_RC_Club for @diyrobocars. Used @emlid RTK GPS and @adafruit @BoschGlobal IMU. Lap time 28s https://t.co/R…
May 28
DIY Robocars via Twitter
May 15
DIY Robocars via Twitter
May 14
DIY Robocars via Twitter
May 13
DIY Robocars via Twitter
RT @f1tenth: Say hi to our newest #F1TENTH creation for @ieee_ras_icra next week in Philly. It’s going to be huge! 😎 🔥 @AutowareFdn @PennEn…
May 13
DIY Robocars via Twitter
May 11
DIY Robocars via Twitter
May 8
DIY Robocars via Twitter
RT @SmallpixelCar: Noticed my car zigzagged in last run. It turned out to be the grass stuck in the wheel and made the odometry less accura…
May 8
More…