APM2.5 no power from Power Module

I have an APM2.5 in AuruCopter mode.

I am able to power on and connect to the unit via direct USB connection.

When I connect my 14.7v 4S LiPo to the Power Module and then connect the PM to the APM2.5, it does not power on.

Power Module '3DR APM 2.5 model 2012-09-24'

APM v2.5.2

 

I have confirmed:

- 15.06v on the LiPo terminals

- 15.06v delivered via the Output on the PM (to ESCs)

- 1.03v when I test the +5v pad on the PM. Confirmed voltage on the female end of the APM connector (red wire and next black wire)

   - 1.03v confirmed across pins on back of APM unit 

- 1.45v when I test the 'V' pad on the PM. Confirmed voltage on APM connector (last wire before 2 ground wires)

   - 1.45 confirmed across pins on back of APM unit

- 0v on the 'I' pad on the PM

 

JP1 is OPEN

 

Mission Planner 1.2.69 (Optioanl Hardware, Battery Monitor) reads 15.012v when the APM is powered by the USB port

 

Help please.

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Hi,

     

    This ended up being a bad part, cheap PM from China.  Swapped it out for one from 3DR and the APM works fine.

     

    -Ty

  • A buddy of mine is having this same issue. He's using an RCTimer ArduFlyer. 

    I'm going to test his power module on my APM tomorrow to see what happens.

This reply was deleted.

Activity

Gremsy liked Gremsy's profile
Mar 12
DIY Robocars via Twitter
RT @chr1sa: Donkeycar 4.4 released with tons of new features, including path learning (useful with GPS outdoors), better Web and Lidar supp…
Nov 27, 2022
DIY Robocars via Twitter
RT @NXP: We are already biting our nails in anticipation of the #NXPCupEMEA challenge! 😉 Did you know there are great cash prizes to be won…
Nov 24, 2022
DIY Robocars via Twitter
RT @gclue_akira: レースまであと3日。今回のコースは激ムズかも。あと一歩 #jetracer https://t.co/GKcEjImQ3t
Nov 24, 2022
DIY Robocars via Twitter
UC Berkeley's DIY robocar program https://roar.berkeley.edu/
Nov 24, 2022
DIY Robocars via Twitter
RT @chr1sa: The next @DIYRobocars autonomous car race at @circuitlaunch will be on Sat, Dec 10. Thrills, spills and a Brazilian BBQ. Fun…
Nov 24, 2022
DIY Robocars via Twitter
RT @arthiak_tc: Donkey car platform ... Still training uses behavioral cloning #TCXpo #diyrobocar @OttawaAVGroup https://t.co/PHBYwlFlnE
Nov 20, 2022
DIY Robocars via Twitter
RT @emurmur77: Points for style. @donkeycar racing in @diyrobocars at @UCSDJacobs thanks @chr1sa for taking the video. https://t.co/Y2hMyj1…
Nov 20, 2022
DIY Robocars via Twitter
RT @SmallpixelCar: Going to @diyrobocars race at @UCSDJacobs https://t.co/Rrf9vDJ8TJ
Nov 8, 2022
DIY Robocars via Twitter
RT @SmallpixelCar: Race @diyrobocars at @UCSDJacobs thanks @chr1sa for taking the video. https://t.co/kK686Hb9Ej
Nov 8, 2022
DIY Robocars via Twitter
RT @PiWarsRobotics: Presenting: the Hacky Racers Robotic Racing Series in collaboration with #PiWars. Find out more and register your inter…
Oct 23, 2022
DIY Robocars via Twitter
RT @Hacky_Racers: There will be three classes at this event: A4, A2, and Hacky Racer! A4 and A2 are based around UK paper sizing and existi…
Oct 23, 2022
DIY Robocars via Twitter
Oct 23, 2022
DIY Robocars via Twitter
Oct 19, 2022
DIY Robocars via Twitter
Oct 18, 2022
DIY Robocars via Twitter
RT @NeaveEng: Calling all UK based folks interested in @diyrobocars, @f1tenth, @donkey_car, and similar robot racing competitions! @hacky_r…
Oct 13, 2022
More…