Ardupilot 2.6 Flipover

Hi, I have a strange thing going on with my drone that I need some help with. First let me say that I am new and don't know the technical information so please be forgiving of me for my lack of knowledge. For lack of better terms when taking off my drone seems like it wants to turn over. It doesn't really violently flip over it is just acting like it is upside down. I have a ardupilot 2.6 which I have carefully configured several times but I am not certain about the connections of the wires to the inputs. All seems to work ok. The board that the wires from the props does not seem to have any directional arrows on it but I have read that it has a forward and a backwards along with an upside down and right side up. Please guide me if you can in the most nontechnical way to help me fix this.

One thing here I should point out is that I have read previous discussions on this and tried all the troubleshooting techniques. None of those have resolved the problem. I am just not sure how to figure out what the problem is and the corrective steps that are needed.

Thank you to anyone that responds with your tips.

Dr. John Crunk

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • I forgot to mention, this is the drone I have. It didn't come with instructions so I am really hurting for information.

    https://www.ebay.com/itm/Six-Axis-Hexacopter-Unassembled-GPS-Drone-...

    Six-Axis Hexacopter Unassembled GPS Drone Kit with Flysky FS-i6 6CH 2.4G TX&RX | eBay
    The Flysky FS-i6 is a affordable, 6CH 2.4G radio system and also a very simple setup for your RC vehicle. 6CH operation. unassembled kit, item need y…
This reply was deleted.

Activity

DIY Robocars via Twitter
RT @Heavy02011: ⁦@diyrobocars⁩ : A Home-brew computer club* for Connected Autonomous Driving. talk at #piandmore ⁦@PiAndMore⁩ on Jan 23rd h…
Saturday
DIY Robocars via Twitter
RT @a1k0n: New blog post! Deep dive into my ceiling light based localization algorithm which runs in 1ms on a Raspberry Pi 3: https://t.co/…
Saturday
DIY Robocars via Twitter
Great new guide to using @donkey_car https://custom-build-robots.com/donkey-car-e-book-en
Saturday
DIY Robocars via Twitter
RT @chr1sa: The next @DIYRobocars virtual AI race is tomorrow morn at 9:00am PT. You can watch live on Twitch https://www.meetup.com/DIYRobocars/events/275268196/
Friday
DIY Robocars via Twitter
New version of Intel OpenBot! This resolves many of the issues with the first version, including a much smoother tr… https://twitter.com/i/web/status/1352395636369313798
Jan 21
DIY Drones via Twitter
Using ArduRover with an RTK GPS https://ift.tt/2N9I3RO
Jan 18
DIY Drones via Twitter
Jan 18
DIY Robocars via Twitter
Jan 18
DIY Robocars via Twitter
Jan 15
DIY Robocars via Twitter
Jan 15
DIY Drones via Twitter
Jan 14
DIY Robocars via Twitter
RT @Heavy02011: @diyrobocars : A Home-brew computer club* for Connected Autonomous Driving on Jan 23rd, 2021 https://www.meetup.com/Connected-Autonomous-Driving/events/275728684/ #Meetu…
Jan 14
DIY Robocars via Twitter
Jan 14
David Hori liked Isabella Domi's profile
Jan 12
DIY Robocars via Twitter
RT @Heavy02011: ⁦@diyrobocars⁩ Autonomous Driving Assembly at #rC3. join us at https://rc3.world/rc3/assembly/diyrobocars-f1tenth/ ⁦@f1tenth⁩ ⁦@DAVGtech⁩ ⁦@DWalmroth⁩…
Jan 11
DIY Robocars via Twitter
RT @chr1sa: New car designs coming for our next @DIYRobocars @donkey_car virtual race on the 23rd. Choose any one you want at race time Le…
Jan 11
More…