Hi,

I tried everything, resoldered, but still the channel 2 input not working in my APM 2.5

Is it possible to change the channel 2 with any other free channel like ch7,ch8?

channel 2 is pitch

Really feeling sad, this is my first costly board I bought but after this I feel dead.

Please guide me on how to change the code for this, if you have been through the process.

Thanks,

Rahul

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Moderator

    You have done the radio calibration, of course? I presume if you plug a servo into CH2 on your Rx the servo works fine? Likewise if you swop the cables or use another extension you still get no output on pitch in the Mission Planner (With CH2 OUT on Rx plugged into CH2 IN on APM?

    Try plug CH1 output from Rx into CH2 IN on the APM, do you see movement of the pitch bar when you move the roll stick? If you still see no movement you may have a defective board.

  • Moderator

    Explain your setup and how you know CH2 input is not working? Also tell us what you've done exactly to try find the cause? Are you getting CH2 out of your receiver?

  • Please answer someone. big problem it is. :(

This reply was deleted.

Activity

DIY Robocars via Twitter
Jan 28
DIY Robocars via Twitter
RT @Heavy02011: ⁦@diyrobocars⁩ : A Home-brew computer club* for Connected Autonomous Driving. talk at #piandmore ⁦@PiAndMore⁩ on Jan 23rd h…
Jan 23
DIY Robocars via Twitter
RT @a1k0n: New blog post! Deep dive into my ceiling light based localization algorithm which runs in 1ms on a Raspberry Pi 3: https://t.co/…
Jan 23
DIY Robocars via Twitter
Great new guide to using @donkey_car https://custom-build-robots.com/donkey-car-e-book-en
Jan 23
DIY Robocars via Twitter
RT @chr1sa: The next @DIYRobocars virtual AI race is tomorrow morn at 9:00am PT. You can watch live on Twitch https://www.meetup.com/DIYRobocars/events/275268196/
Jan 22
DIY Robocars via Twitter
New version of Intel OpenBot! This resolves many of the issues with the first version, including a much smoother tr… https://twitter.com/i/web/status/1352395636369313798
Jan 21
DIY Drones via Twitter
Using ArduRover with an RTK GPS https://ift.tt/2N9I3RO
Jan 18
DIY Drones via Twitter
Jan 18
DIY Robocars via Twitter
Jan 18
DIY Robocars via Twitter
Jan 15
DIY Robocars via Twitter
Jan 15
DIY Drones via Twitter
Jan 14
DIY Robocars via Twitter
RT @Heavy02011: @diyrobocars : A Home-brew computer club* for Connected Autonomous Driving on Jan 23rd, 2021 https://www.meetup.com/Connected-Autonomous-Driving/events/275728684/ #Meetu…
Jan 14
DIY Robocars via Twitter
Jan 14
DIY Robocars via Twitter
RT @Heavy02011: ⁦@diyrobocars⁩ Autonomous Driving Assembly at #rC3. join us at https://rc3.world/rc3/assembly/diyrobocars-f1tenth/ ⁦@f1tenth⁩ ⁦@DAVGtech⁩ ⁦@DWalmroth⁩…
Jan 11
DIY Robocars via Twitter
RT @chr1sa: New car designs coming for our next @DIYRobocars @donkey_car virtual race on the 23rd. Choose any one you want at race time Le…
Jan 11
More…