Hi Guys,
I need help with selection of parts for my Robocat 270 drone. I have a Turnigy Pro radio and frsky X8R receiver and transmitter. Need a flight controller that has GPS, Flight Hold, Return Home and Camera Gimbal capable.
Something that I can use my phone to control and FPV would be awesome to have.
I have the following items below
Turnigy 9XR Pro
Frsky X8R R/T
Turnigy 30A esc
Robocat 270mm frame
Need
Flight Controller
Power distribution board
Reliable motors for a 30 amp esc
Ty
Replies
Pix hawk is not easy if your not going to read and follow the instructions to the letter ! this FC is well documented and open source!
you may want to look at DJI N3 or A4 this are the newer FC from DJI !
That is very old as well 8 bit technology ! if your doing photo work it is ok it works but OLD!
motors are very subjective you need to know waight of the craft and KV of the motor and prop size other wise we can not help you! I suggest you ditch turnigy ESC garbage for a 32bit 4 in 1 Bheli firm wear NEW 32bit ESC . A good pairing with a 32Bit flight controller like pix hawk.
http://brushlessgimbal.ca/Multi-Rotor-Products-Parts/ESC/4-IN-1-40A...
http://brushlessgimbal.ca/Multi-Rotor-Products-Parts/ESC/T-Motor-F5...
http://brushlessgimbal.ca/Multi-Rotor-Products-Parts/ESC/XRotor-40A...
Power distribution board & Current Sensor:
http://brushlessgimbal.ca/Multi-Rotor-Products-Parts/Parts/Power-Cu...
32 bit FC:
http://brushlessgimbal.ca/Auto-Pilot-Controller/Pixracer-Autopilot-...
http://brushlessgimbal.ca/Auto-Pilot-Controller/Pix-Hawk-Micro-Race...
http://brushlessgimbal.ca/Auto-Pilot-Controller/PX4-Micro-Flight-Co...
http://brushlessgimbal.ca/Auto-Pilot-Flight-Controller/Radiolink-Mi...